Publications

A.Y.2016-17

Name of Faculty Name of International Conference/ Journal Title of Paper ISBN/ISJN No.& Page No. College Name Department
Dr. D. P. Kadam International Journal of Engineering Science & Advanced Technology,Volume-2, Issue-4, Overview of different wind generator systems and their comparisons  ISSN2250–3676   SIEM Electrical
Joydeep Sarkar International Journal Of Innovative Research In Electrical, Electronics, Instrumentation And Control Engineering, Vol. 5, Issue 3, Hydrogen Generation from Bio waste & its Application as a Fuel 2321–2004   SIEM Electrical
Pallavi Jadhav International Journal Of Innovative Research In Electrical, Electronics, Instrumentation And Control Engineering, Vol. 5, Issue 3, Hydrogen Generation from Bio waste & its Application as a Fuel 2321–2004   SIEM Electrical
Roopali Patil International Journal Of Innovative Research In Electrical, Electronics, Instrumentation And Control Engineering, Vol. 5, Issue 3 Hydrogen Generation from Bio waste & its Application as a Fuel 2321–2004   SIEM Electrical
Sharmila M. International Journal Of Innovative Research In Electrical, Electronics, Instrumentation And Control Engineering, Vol. 5, Issue 3 Hydrogen Generation from Bio waste & its Application as a Fuel 2321–2004   SIEM Electrical
Sharaddha Vinchurkar International Journal Of Innovative Research In Electrical, Electronics, Instrumentation And Control Engineering, Vol. 5, Issue 3 Hydrogen Generation from Bio waste & its Application as a Fuel 2321–2004   SIEM Electrical
Joydeep Sarkar International Journal Of Innovative Research In Electrical, Electronics, Instrumentation And Control Engineering, Vol. 4, Issue 3 Microbial Disintegration of Bio-Waste for Hydrogen Generation for Application in Fuel Cel 2395-0056   SIEM Electrical
Pallavi Jadhav International Journal Of Innovative Research In Electrical, Electronics, Instrumentation And Control Engineering, Vol. 4, Issue 3 Microbial Disintegration of Bio-Waste for Hydrogen Generation for Application in Fuel Cel 2395-0056   SIEM Electrical
Roopali Patil International Journal Of Innovative Research In Electrical, Electronics, Instrumentation And Control Engineering, Vol. 4, Issue 3 Microbial Disintegration of Bio-Waste for Hydrogen Generation for Application in Fuel Cel 2395-0056   SIEM Electrical
Sharaddha Vinchurkar International Journal Of Innovative Research In Electrical, Electronics, Instrumentation And Control Engineering, Vol. 4, Issue 3 Microbial Disintegration of Bio-Waste for Hydrogen Generation for Application in Fuel Cel 2395-0056   SIEM Electrical
Roopali Patil International journal of scientific research & development,Vol.5, issue02 Design and implantation of smart bridge system for protection against natural disaster 2321-0613   SIEM Electrical
Sharmila M. International journal of scientific research & development,Vol.5, issue02 Design and implantation of smart bridge system for protection against natural disaster 2321-0613   SIEM Electrical
Dinesh Malkhede International journal of science Technology & Engineering, Vol.03, Issue05 Control Technique of Single Stage Grid Connected PV System 2349-784X   SIEM Electrical
Dinesh Malkhede International Journal of Scientific Research & Development (IJSRD),Vol.04, Issue07 Interfacing of photovoltaic Array to the Utility Grid using CSI 2321-0613   SIEM Electrical
RK Harshvardhan International Journal of Electrical, Electronics and Computer Engineering (IJEECE) Study of Auto changeover system for Backup Generator using PLC ISSN 2277-2626   SIEM Electrical
Vikram Patil International Journal of Electrical, Electronics and Computer Engineering (IJEECE) Study of Auto changeover system for Backup Generator using PLC ISSN 2277-2626   SIEM Electrical
Vikram Patil International Journal of Electrical, Electronics and Computer Engineering (IJEECE) study and Analysis of Single Stage Transformer-less Inverter for Grid Connected PV Systems by using CSI ISSN 2277-2626   SIEM Electrical
Vikram Patil International Journal of Electrical, Electronics and Computer Engineering (IJEECE) programming of Ultra Fast Acting Electronic Circuit Breaker ISSN 2277-2626   SIEM Electrical
Vikram Patil Journal of Harmonized Research (JOHR) A single stage transformer less inverter for grid connected PV system by using CSI ISSN 2347-7393   SIEM Electrical
Sharmila M International Organization of Scientific Research Journal of Electrical and Electronics Engineering(IOSR-JEEE) Automatic Solar Power irrigation System e-ISSN 2278-1676, p-ISSN 2320-3331   SIEM Electrical
Piyush Desai HCTL Open International Journal of Technology Innovations and Research (IJTIR), Vol. 24, issue.02 Fault Detection of Induction Motor by using PLC 2321-1814   SIEM Electrical
Piyush Desai International Journal of Advanced Research in Electrical, Electronics & Instrumentation Engineering,Vol.06, Issue .04 Dual Axis Solar Tracker using AVR 2320-3765   SIEM Electrical
Piyush Desai International Journal for Research in Engineering Application & Management (IJREAM), vol.02, Issue.05 Reactive Power Compensation Through grid Connected PV system Using STATCOM 2494-9150   SIEM Electrical
Pallavi Jadhav A R DIGITECH International Journal Of Engineering, Education And Technology, Vol. 4, Issue 3, A novel Adaptive Control for DSTATCOM by using ANN 2320-883X   SNDCOE Electrical
Rakesh Jha A R DIGITECH International Journal Of Engineering, Education And Technology, Vol. 4, Issue 3, A novel Adaptive Control for DSTATCOM by using ANN 2320-883X   SNDCOE Electrical
Pallavi Jadhav International Journal for Scientific Research & Development, Vol. 4, Issue 6 Controlling of DSTATCOM for pulsed load by using ANN 2321-0613   SNDCOE Electrical
Pallavi Jadhav The International Journal on Emerging Trends in Technology, Vol.3, Issue 3 Controlling of DSTATCOM by using Artificial Neural network 2455-0124   SNDCOE Electrical

A.Y. 2015-16

Name of Faculty Name of International Conference/ Journal Title of Paper ISBN/ISJN No.& Page No. College Name Department
Shraddha Vinchurkar International Journal on Recent and innovation trends in computing and communication. Vol. 3, Issue 7, Comparison Between Three Phase And Five Phase Induction Motor By Using Converter 2321-8169   SIEM Electrical
Prasanna A. Pothi International Journal on Recent and innovation trends in computing and communication. Vol. 3, Issue 7, Comparison Between Three Phase And Five Phase Induction Motor By Using Converter 2321-8169   SIEM Electrical
R. K. Harshvardhan International Journal of Engineering and Technology Vol. 2, Issue 5, PCB Fault Detection Using Mathematical Morphology A Review 2394-6881   SIEM Electrical
Manisha Kude International Journal of Engineering and Technology Vol. 2, Issue 5, PCB Fault Detection Using Mathematical Morphology A Review 2394-6881   SIEM Electrical
Vikram Patil International Journal of Engineering and Technology Vol. 2, Issue 5, PCB Fault Detection Using Mathematical Morphology A Review 2394-6881   SIEM Electrical
Manisha Kude International Journal of Innovative Research in Computer and Communication Engineering Vol. 3, Issue 10, Skitone Detection Based On Steganography Using Wavelet Transform 2320-9801   SIEM Electrical
Dinesh Malkhede International Journal of Engineering Sciences & Research Technology Vol. 5, Issue 2, Performance Analysis of PI Based STATCOM for the 132 kV Transmission Line 23277-9655   SIEM Electrical
M. Sharmila International Journal of Engineering Sciences & Research Technology Vol. 5, Issue 2, Performance Analysis of PI Based STATCOM for the 132 kV Transmission Line 23277-9655   SIEM Electrical
Sagar Shinde International Journal of Engineering Sciences & Research Technology Vol. 5, Issue 2, Performance Analysis of PI Based STATCOM for the 132 kV Transmission Line 23277-9655   SIEM Electrical
Pallavi Jadhav International Journal for Research in Engineering Application & Management  Vol. 1, Issue 12, A Novel Adaptive Control For DSTATCOM for Pulse Load by using ANN 2494-9150 SNDCOE Electrical
Pallavi Jadhav A R DIGITECH International Journal Of Engineering, Education And Technology Vol. 4, Issue 2, A Novel Adaptive Control For DSTATCOM by Using ANN 2320-883X SNDCOE Electrical
Deepak Kadam International Journal of Current Trends in Engineering & Research Vol. 2, Issue 4, Power Quality Study 2455-1392 KKW Electrical
Joydeep Sarkar International Journal for Research in Applied Science and Engineering Technology (IJRASET) 2321-9653 Vol. 4 No. 2 Distribution Line Fault Detection & GSM Module Based Fault Signaling System   SIEM Electrical
Joydeep Sarkar International Journal of Innovative Research in Science, Engineering and Technology Vol. 4 No. 11 Implementation of Photovoltaic Energy based Dynamic Voltage Restorer in Grid   SIEM Electrical
Joydeep Sarkar Spvryan’s International journal of Engineering Sciences & technology(SEST) Vol.2, Issue04, Improved generation by an intelligent MPPT system based on PMSG-WECS system 2394-0905   SIEM Electrical
Roopali Patil Spvryan’s International journal of Engineering Sciences & technology(SEST), Vol.2, Issue04, Improved generation by an intelligent MPPT system based on PMSG-WECS system 2394-0905   SIEM Electrical

A.Y.2014-15

Name Of Faculty Name Of International Conference/ Journal Title Of Paper ISBN/ISJN No.& Page No. College Name Department
Dr. D P Kadam International Journal Of Engineering Sciences & Research Technology, Vol. 3 No. 2, Stability And Reactive Power Compensation Techniques In Wind Farm   SIEM Electrical Engineering
Rakesh Jha International Journal Of Emerging Technology And Advanced Engineering, Vol. 3 No. 10, Design And analysis Of synchronous Alternator For reduction In harmonics And temperature By short Pitch Winding SIEM Electrical Engineering
Vikram Patil International Journal Of Educational Administration, Vol. 01, Issue 04, Analysis Of The Dynamic Impact Of Large Wind Parks In Power System Based On Scig 2320-0804,2013 SIEM Electrical Engineering
Sagar Shinde Institution Of Communication Engineers And Information Technologists (ICEIT)Institution Of Communication Engineers And Information Technologists (ICEIT), Vol. 03, Issue 03, Performance Analysis Vsi Based Multilevel Inverter 2319-8753
2014
SIEM Electrical Engineering
Sagar Shinde The International Journal Of Advanced Research In Electrical And Electronics Engineering(Ijareee),Vol. 02, Issue 02, Performance Comparison Of Three Phase Five Level & Seven Level Dcmli 2321-4775
,2014
SIEM Electrical Engineering
Joydeep Sarkar Of Innovative Science, Engineering & Technology, Vol. 1, Issue 4, Detection Of Partial Discharges Occurring In Hvdc Environment 2348-7968 SIEM Electrical Engineering
Roopali Patil Of Innovative Science, Engineering & Technology, Vol. 1, Issue 4, Detection Of Partial Discharges Occurring In Hvdc Environment 2348-7968 SIEM Electrical Engineering
Pooja Patil International Journal Of Industrial Electronics And Electrical Engineering , Vol.02, Issue.05, Application Of High Temperature Superconductors In Designing Efficient Power Transmission System 2347-6982 SIEM Electrical Engineering
Vikram Patil International Journal Of Advances In Electrical An D Electrical Engineering Optimal Power Flow Ieee 14 Bus System Using Facts Device With Voltage Constraints Issn 2319-1112 SIEM Electrical Engineering
Dr. D P Kadam International Journal Of Scientific & Technology Research, Vol.3,Issue 3 Voltage Sag Mitigation Using Smes Based Dvr Technology 2277-8616 SIEM Electrical Engineering
Dr. D. P. Kadam International Journal Of Engineering Research And Technology, Vol. 2, Issue No. 7 Full Bridge Bi-Directional Pmdc Drive Using Chopper Fed Igbt SIEM Electrical Engineering
Dr. D. P. Kadam International Journal Of Innovative Technology And Research(Ijitr), Vol. 2, No. 4, Mitigation Of Harmonics By Using Statcom SIEM Electrical Engineering
Dr. D. P. Kadam International Journal Of Advanced Research In Electrical, Electronics & Instrumentation Engineering, Vol. 2, No. 8, Harmonics Analysis For Wind Power System SIEM Electrical Engineering
Dr. D. P. Kadam International Journal Of Innovative Research In Electrical, Electronics, Instrumentation And Control engineering, Vol. 1, No. 5 Mitigation Of Voltage Sag In Grid Connected Large Scale Wind Farm 2321-5526 SIEM Electrical Engineering
Dr. D. P. Kadam International Journal Of Engineering Sciences & Research Technology, Vol. 3, No. 3 Voltage Swell Mitigation In Wind Farm System SIEM Electrical Engineering
Joydeep Sarkar International Journal Of Engineering Sciences & Research Technology, Vol. 3, Issue 7, Structuring Dc Microgrid For Integrating Renewable Energy In Dc Load Dominant Environment 2277-9655 SIEM Electrical Engineering
Pramod Yade International Journal Of Engineering Sciences & Research Technology, Vol. 3, Issue 7, Structuring Dc Microgrid For Integrating Renewable Energy In Dc Load Dominant Environment 2277-9655 SIEM Electrical Engineering
Joydeep Sarkar International Journal Of Emerging Technology And Advanced Engineering (IJETAE), Vol. 4, Issue 9, Maximum Power Tracking Of Permanent Magnet Synchronous Generator In Wind Technology 2250-2459 SIEM Electrical Engineering
Pramod Yade International Journal Of Emerging Technology And Advanced Engineering (IJETAE), Vol. 4, Issue 9, Maximum Power Tracking Of Permanent Magnet Synchronous Generator In Wind Technology 2250-2459 SIEM Electrical Engineering
Milind Tambat International Journal Of Emerging Technology And Advanced Engineering (IJETAE), Vol. 4, Issue 9, Maximum Power Tracking Of Permanent Magnet Synchronous Generator In Wind Technology 2250-2459 SIEM Electrical Engineering
Joydeep Sarkar International Journal Of Innovative Research In Electrical, Electronics, Instrumentation And Control Engineering
International Journal Of Innovative Research In Electrical, Electronics, Instrumentation And Control Engineering,Vol. 2, Issue 8,
Estimation Of Hvdc Partial Discharge Incident Occurrence 2321-2004 SIEM Electrical Engineering
Pramod Yade International Journal Of Innovative Research In Electrical, Electronics, Instrumentation And Control Engineering, Vol. 2, Issue 8, Estimation Of Hvdc Partial Discharge Incident Occurrence 2321-2004 SIEM Electrical Engineering
Joydeep Sarkar International Journal Of Innovative Research In Electrical, Electronics, Instrumentation And Control Engineering,Vol. 4, Issue 10, Review Of Fuel Cell Based Electric Vehicles Propulsion System 2249-6645 SIEM Electrical Engineering
Pramod Yade International Journal Of Innovative Research In Electrical, Electronics, Instrumentation And Control Engineering, Vol. 4, Issue 10, Review Of Fuel Cell Based Electric Vehicles Propulsion System 2249-6645 SIEM Electrical Engineering
Milind Tambat International Journal Of Innovative Research In Electrical, Electronics, Instrumentation And Control Engineering, Vol. 4, Issue 10, Review Of Fuel Cell Based Electric Vehicles Propulsion System 2249-6645 SIEM Electrical Engineering
Joydeep Sarkar International Journal Of Multidisciplinary Educational Research, Vol. 4, Issue 10, A Technology Review Of Electricity Generation From Nuclear Fusion Reaction In Future 2249-6645 SIEM Electrical Engineering
Joydeep Sarkar International Journal Of Electrical, Electronics And Data Communication (IJEEDC), Vol. 3, Issue 03, Improved Synchronism In Dfig Wind Energy Conversion System Using Smes Energy Storage 2320-2084 SIEM Electrical Engineering
Joydeep Sarkar Iosr Journal Of Electrical And Electronics Engineering, Vol. 10, Issue 1, Improved Synchronism In Dfig Wind Energy Conversion System Using Smes Energy Storage 2278-1676 SIEM Electrical Engineering
Patel Rajankumar International Journal Of Electrical, Electronics And Computer Engineering, Vol. 04, Issue 01, Application Of Control Strategy For Dstatcom In An Electric Ship Power System 2277-2626 SIEM Electrical Engineering
Milind Tambat International Journal Of Electrical Engineering And Technology (IJEET)
A R Digitech International Journal Of Engineering, Education & Technology(Ardijeet), Vol.03, Issue 02,
Review Of Reactive Power Compensation Using Statcom In Comparison To Svc 2320-883x SIEM Electrical Engineering
Joydeep Sarkar International Journal Of Electrical Engineering And Technology (IJEET)
A R Digitech International Journal Of Engineering, Education & Technology(Ardijeet), Vol.03, Issue 02,
Review Of Reactive Power Compensation Using Statcom In Comparison To Svc 2320-883x SIEM Electrical Engineering
Madhuraj Sharma International Journal Of Electrical Engineering And Technology (IJEET), Vol. 03, Issue 02, Study Analysis And Modern Trends In Hvdc Technology 2320-883x SIEM Electrical Engineering
Dr.Hanumanprasad Journal Of Mining Science, Vol.51, No.6, Recent Developments In Mine Hoists Drives Pp. 11557-1164 SIEM Electrical Engineering
Swati Gajeshwar International Organization Of Scientific Research Journal Of Electrical And Electronics Engineering(Iosr-Jeee) Zig-Bee System For The Transformer Condition Monitoring & Protection E-Issn 2278-1676, P-Issn 2320-3331 SIEM Electrical Engineering
Sharmila M. International Organization Of Scientific Research Journal Of Electrical And Electronics Engineering(Iosr-Jeee) Zig-Bee System For The Transformer Condition Monitoring & Protection E-Issn 2278-1676, P-Issn 2320-3331 SIEM Electrical Engineering
Pallavi Sanjay Jadhav International Journal Of Electrical Engineering And Technology (IJEET), Vol. 03, Issue 02, Non Intrusive Appliances Monitoring Using Wireless Network 2320-883x SIEM Electrical Engineering
M. Sharmila International Journal Of Engineering Trends And Technology, Vol. 02, Issue 01, Pv-Dvr Based Efficient Interleaved Converter For Improving Voltage Quality 2350-0808 SIEM Electrical Engineering
Vikram Patil International Journal Of Engineering Trends And Technology, Vol. 02, Issue 01, Pv-Dvr Based Efficient Interleaved Converter For Improving Voltage Quality 2350-0808 SIEM Electrical Engineering
Sagar Shinde International Journal Of Engineering Trends And Technology, Vol. 02, Issue 01, Pv-Dvr Based Efficient Interleaved Converter For Improving Voltage Quality 2350-0808 SIEM Electrical Engineering
R.K. Harshvardhan International Journal Of Emerging Trends In Science And Technology, Vol. 2, Issue 6, Stepper Motor : A Review On Theory And Fundamentals 2348-9480 SIEM Electrical Engineering
Milind Tambat International Journal Of Emerging Trends In Science And Technology, Vol. 2, Issue 6, Stepper Motor : A Review On Theory And Fundamentals 2348-9480 SIEM Electrical Engineering
Vikram Patil International Journal Of Emerging Trends In Science And Technology, Vol. 2, Issue 6, Stepper Motor : A Review On Theory And Fundamentals 2348-9480 SIEM Electrical Engineering
Dr. D P Kadam International Journal Of Electrical Engineering, Volume-5,Issue-6,. Dynamic Behaviour Of Large Scale Wind Farm KKW Electrical Engineering
Dr. D. P. Kadam International Journal Of Scientific & Research Publications, Vol. 4, No. 1 Design Of Fuzzy Controller & Supervisor For Load Frequency Control Of Micro Hydro Power Plant KKW Electrical Engineering
Dr. Hanuman prasad Asian Power Electronics Journal, Vol. 8 No. 2 A Simple Transformer less Buck-Boost Switching Voltage Regulator SIEM Electrical Engineering
Joydeep Sarkar International Journal Of Innovative Research In Electrical, Electronics, Instrumentation And Control Engineering, Vol. 2 No. 8 Estimation Of Hvdc Partial Discharge incident Occurrences SIEM Electrical Engineering

A.Y. 2013-14

Name Of Faculty Name Of International Conference/ Journal Title Of Paper ISBN/ISJN No.& Page No. College Name Department
Sagar Shinde Institution of Communication Engineers and Information Technologists (ICEIT) Vol. 03, Issue 03, Performance Analysis VSI Based Multilevel Inverter 2319-8753 SIEM Electrical Engineering
Sagar Shinde The International Journal of Advanced Research in Electrical and Electronics Engineering(IJAREEE)  Vol. 02, Issue 02, Performance  Comparison of Three Phase Five Level & Seven level DCMLI 2321-4775 SIEM Electrical Engineering
Joydeep Sarkar International Journal of Innovative Science, Engineering & Technology Vol. 1, Issue 4, Detection Of Partial Discharges Occurring In HVDC Environment 2348-7968 SIEM Electrical Engineering
Roopali Patil International Journal of Innovative Science, Engineering & Technology Vol. 1, Issue 4, Detection Of Partial Discharges Occurring In HVDC Environment 2348-7968 SIEM Electrical Engineering
Pooja patil international journal of industrial Electronics and Electrical engineering  Vol.02, issue.05, Application of high temperature superconductors in designing efficient power transmission system 2347-6982 SIEM Electrical Engineering
Vikram Patil international journal of Advances in Electrical an d Electrical Engineering Optimal power flow IEEE 14 bus system using FACTS device with voltage constraints ISSN 2319-1112 SIEM Electrical Engineering
Dr. D. P. kadam International Journal of Scientific & Technology Research VOL.3,ISSUE 3 Voltage Sag Mitigation Using Smes Based DVR Technology 2277-8616 KKW Electrical Engineering
Dr. D. P. kadam International Journal of Engineering Research and Technology Vol. 2, No. 7 Full Bridge Bi-Directional PMDC Drive Using Chopper Fed IGBT KKW Electrical Engineering
Dr. D. P. kadam International Journal Of Innovative Technology And Research(IJITR) Vol. 1, No. 4 Mitigation of harmonics by using STATCOM KKW Electrical Engineering
Dr. D. P. kadam International Journal of Advanced Research in Electrical, Electronics & Instrumentation Engineering Vol. 2, No. 8 Harmonics Analysis for Wind Power System KKW Electrical Engineering
Dr. D. P. kadam INTERNATIONAL JOURNAL OF INNOVATIVE RESEARCH IN ELECTRICAL, ELECTRONICS, INSTRUMENTATION AND CONTROLENGINEERING Vol. 1, No. 5 Mitigation of Voltage Sag in Grid Connected Large Scale Wind Farm 2321-5526 KKW Electrical Engineering
Dr. D. P. kadam INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY Vol. 3, No. 3 Voltage Swell mitigation in Wind Farm System KKW Electrical Engineering

A.Y. 2012-13

Name Of Faculty Name Of International Conference/ Journal Title Of Paper ISBN/ISJN No.& Page No. College Name Department
Dr. D. P. kadam INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY Vol. 3 No. 2 Stability and Reactive Power Compensation Techniques in Wind Farm KKW Electrical Engineering
Rakesh Jha International Journal of Emerging Technology and Advanced Engineering Vol. 3 No. 10 Design and Analysis of Synchronous Alternator for Reduction in Harmonics and Temperature by Short Pitch Winding KKW Electrical Engineering
Vikram patil International Journal of Educational Administration Vol. 01, Issue 04, Analysis of the dynamic impact of large wind parks in power system Based on SCIG 2320-0804 SIEM Electrical Engineering
Name of Faculty Name of International Conference/ Journal Title of Paper ISBN/ISJN No.& Page No. College Name Department
Dr.  K. C. Nalavade IJCSNS International Journal of Computer Science and Network Security Layered Security Framework for Intrusion Prevention ISSN : 1738-7906 SIEM Computer
Mr. Amit G. Patil, Kiran Avhad, Suresh Limkar International Journal of Scientific and Research Publication (IJSRP) Survey of Routing Techniques in Opportunistic Networks NA SIEM Computer
Dr. K. C. Nalavade International Journal of Engineering Research and Applications (IJERA) Data Classification using Support Vector Machines ISSN: 2248-9622 SIEM Computer
Dr. K. C. Nalavade Journal of Engineering Research and Studies METHODOLOGIES FOR INTRUSION DETECTION &PREVENTION E-ISSN0976-7916 SIEM Computer
Mr. Pramod C. Patil IOSR Journal of Engineering (IOSRJEN) Mobility and Security Management in the GSM System ISSN: 2250-3021 ISBN: 2878-8719 PP 13-18 SIEM Computer
Mr. Avinash Taskar, Bhushan Sinkar International Journal of Engineering and Advanced Technology (IJEAT) Privacy-Preserving Location Query Service using Privacy Preserving Distance Computation’ ISSN: 2249-8958 (Online), SIEM Computer
Dr. K. C. Nalavade International Journal of Data & Network Security Denial of Service on TCP/IP Security Protocols: Vulnerabilities, Tools and Countermeasures ISSN 2319-1236 Vol. 4, No. 1 SIEM Computer
Dr. K. C. Nalavade International Journal of Computer and Internet Security Adaptive Anomaly Detection for Network Security ISSN 0974-2247 Volume 5, Number 1 (2013), pp. 1-9 SIEM Computer
Dr. K. C. Nalavade International Journal of Computer Application Generic Network Intrusion Prevention System 0975 – 8887 SIEM Computer
Dr. K. C. Nalavade INTERNATIONAL JOURNAL OF PURE AND
APPLIED RESEARCH IN ENGINEERING AND
TECHNOLOGY
E-MAIL PROTOCOLS: VULNERABILITIES, ATTACKS AND DEFENSE MECHANISMS ISSN: 2319-507X Volume 1(8): 552-567 SIEM Computer
Mr. Pramod C. Patil INTERNATIONAL JOURNAL OF PURE AND
APPLIED RESEARCH IN ENGINEERING
A REVIEW ON VIRTUAL DATABASE SYSTEM USING MAP-REDUCE
TECHNOLOGY
ISSN: 2319-507X IJPRET, 2014; Volume 2 (8): 201-207 SIEM Computer
Mr. Dattatray S. Shingate International Journal of Advance Research in Science, Engineering and Technology A Secure Authentication Mechanism using 3D Password ISSN: 2278- 2567 Vol.01, Issue 01, pp. 29-37 SIEM Computer
Mr. Dattatray S. Shingate IOSR Journal of Engineering (IOSRJEN) Mobility and Security Management in the GSM System ISSN: 2250-3021 ISBN: 2878-8719 PP 13-18 SIEM Computer
Mr. Dattatray S. Shingate IJCSIET Securing Mobile System Locations by Anonymous Server Design Based on Optimal Principle. Securing Mobile System Locations by Anonymous Server ISSN:2277-4408||01032013-002 ISSUE3-VOLUME SIEM Computer
Apurva N. Mahajan, Prof. I. R. Shaikh International Journal of Computer Science and Mobile Computing(IJCSMC) Detecting Covert Channels in TCP/IP Header with the Use of Naïve Bayes Classifier ISSN 2320-088X SIEM Computer
Apurva N. Mahajan, Prof. I. R. Shaikh International Journal of Computer Science and Mobile Computing(IJCSMC) Detect Covert Channels in TCP/IP Header with the Using Naïve Bayes ISSN 2320-088X SIEM Computer
Apurva N. Mahajan, Prof. I. R. Shaikh International Journal of Computer Science and Engineering(IJCSE) Review on Covert Channel Detection methods of TCP/IP Header ISSN 2347-2693 SIEM Computer
Dr. K. C. Nalavade International Journal of Computer Applications (0975 – 8887) Evaluation of K-Means Clustering for Effective Intrusion Detection and Prevention in Massive Network Traffic Data 0975 – 8887 Volume 96– No.7, June 2014 SIEM Computer
Dr. K. C. Nalavade International Journal of Computer Applications Technology and Research Layered Approach for Preprocessing of Data in Intrusion Prevention Systems Volume 3– Issue 6, 364 – 369, 2014, ISSN: 2319–8656 SIEM Computer
Dr. K. C. Nalavade International Journal of Advanced Computer Research Mining Association Rules to Evade Network Intrusion in Network Audit Data ISSN (print): 2249-7277 ISSN (online): 2277-7970)
Volume-4 Number-2 Issue-15 June-2014
SIEM Computer
Dr. K. C. Nalavade International Journal of Computer Applications & Information Technology Finding Frequent Itemset using Apriori Algorihm to Detect Intrusions in Large Dataset Vol. 6, Issue I June July 2014 (ISSN: 2278-7720) SIEM Computer
Mr. Sujit A.AHIRRAO International Journal of Computer Applications Technology and Research Android Based Remote Surveillance System and Content Sharing Between PC And Mobile Volume 4– Issue 2, ISSN:- 2319–8656, SIEM Computer
Mr. Sujit A.AHIRRAO IJIS International Journal of Information Systems Securing Data in Cloud Using Session Key ISSN : 2229-5429 ISSN:- 978-81-927230-9-9 SIEM Computer
Mr. Sujit A. AHIRRAO International Journal of Engineering Research & Technology (IJERT) Mobile Based College ERP System ISSN: 2278-0181 Vol. 4 Issue 3 SIEM Computer
Mr. Sujit A. AHIRRAO International Journal of Advanced Technology in Engineering and Science www.ijates.com VISUAL CRYPTOGRAPHY SCHEME FOR COLOR IMAGE USING K-N SECRET SHARING ALGORITHM Volume No.03, Issue No. 02, ISSN (online): 2348 – 7550, SIEM Computer
Mr. Umesh Pawar International Journal of Modern Trends in Engineering & Research (IJMTER) Mobile Learning Application with Online Query Support ISSN (Online): 2349-9745 SIEM Computer
Mr.  Abhay R. Gaidhani International Journal of Advanced Technology in Engineering and Science Search Me: Privacy Preserving Location Query Service 2348 – 7550 SIEM Computer
Mr. Abhay R. Gaidhani International Research Journal of Engineering and Technology News Reader Application for Blind People using Text to Speech Synthesis 2395 -0072 SIEM Computer
Mr. Abhay R. Gaidhani International Journal of Scientific & Engineering Research Smartphone Based Vehicle Tracking And Accident Prevention system SSN:2229-5518 SIEM Computer
Mr. Abhay R. Gaidhani International Journal of Computer Applications & Information Technology Sand Search Engine ISSN:2278-7720 SIEM Computer
Mr. Amit Patil International Journal of Modern Trends in Engineering & Research (IJMTER) Searching Encrypted Data Over Cloud NA SIEM Computer
Mr. Amit Patil International Journal of Modern Trends in Engineering & Research (IJMTER) RFID Based Campus Management System NA SIEM Computer
Mr. Avinash R. Potdar International Journal of Modern Trends in Engineering and Research (IJMTER) A Review Report on Enhancement of Web Security Using Vulnerability & Attack Injection ISSN (Online):2349–9745; ISSN (Print):2393-8161 SIEM Computer
Mr. Avinash R. Potdar International Journal of Modern Trends in Engineering and Research (IJMTER) To identify using minor finger knuckle patterns in verifying human identities ISSN (Online):2349–9745; ISSN (Print):2393-8161 SIEM Computer
Mr. Avinash R. Potdar International Journal of Informative & Futuristic Research(IJIFR) Review On Graphical Password Authentication By Using Cloud ISSN: 2347-1697 SIEM Computer
Mr. Avinash R. Potdar International Journal of Informative & Futuristic Research(IJIFR) A Location Based Emergency Service Responder ISSN: 2347-1697 SIEM Computer
Mr. Avinash R. Potdar international journal of multidisciplinary educational research constriction based particle filter to denoise video and trace multiple moving objects ISSN: 2277-7881 SIEM Computer
Mr. Mahesh V Korade International Journal of Advanced Research in Computer Science and Software Engineering (IJARCSSE) Novel Approach on Filtration and Rain Reclamation of Video ISSN: 2277 128X SIEM Computer
Mr. Piyush Kulkarni, Avinash Taskar INTERNATIONAL CONFERENCE ON EMERGING TRENDS & RESEARCH IN ENGINEERING,SCIENCE AND MANAGEMEN A Noval Approach For Authentication In File Transfer Using Bluetooth” NA SIEM Computer
Mr. Piyush Kulkarni, Kapil Vyas International Journal of Advanced Research in Computer and Communication Engineering(IJARCCE) Computing shortest path for graph using FEM framework ISSN(Online): 2278-1021 SIEM Computer
Mr. Piyush Kulkarni, Kapil Vyas International Journal of Engineering Science and Computing(IJESC) Computing shortest path for graph using FEM framework ISSN: 2321-3361 SIEM Computer
Mr. Piyush Kulkarni, Kapil Vyas International Journal of Advanced Research and Innovative Ideas in Education(IJARIIE) Computing shortest path for graph using FEM framework ISSN (Online): 2395-4396 SIEM Computer
Mr. Piyush Kulkarni International Journal of Modern Trends in Engineering & Research (IJMTER) 8 D Problem Solving Process ISSN (Online): 2393-8196 SIEM Computer
Mr. Sujit  A. AHIRRAO International Journal of Novel Research in Computer Science and Software Engineering A Review on Improved Storage Security and Performance Using Container Deduplication ISSN 2394-7314, Vol. 2, Issue 3, SIEM Computer
Mr. Sujit A.AHIRRAO International Journal of Novel Research in Computer Science and Software Engineering A Review on Security for Accessing Data Using Real Cloud Computing ISSN 2394-7314, Vol. 2, Issue 3 SIEM Computer
Mr. Sujit A. AHIRRAO International Journal of Modern Trends in Engineering and Research (IJMTER) A Review: Smart Schooling System ISSN 2393 – 8191, Volume 02, Issue 11, SIEM Computer
Mr. Sujit A. AHIRRAO International Journal of Modern Trends in Engineering and Research (IJMTER) Generic Recommendation Engine in Distributed Environment ISSN 2393-8161, Volume 03, Issue 09 SIEM Computer
Mr. Sujit A. AHIRRAO Elixir International Journal Implementation and Review of Advanced Network Intrusion Detection and Prevention System Using Rule Based Mining Techniques ISSN 2229 -721X, 38915-38920 SIEM Computer
Mr. Sujit A. AHIRRAO International Journal of Modern Trends in Engineering and Research (IJMTER) A REVIEW – TOUCH & PAY: USING NEAR FIELD COMMUNICATION ISSN 2393-8161, Volume 03, Issue 09 SIEM Computer
Mr. Sujit A.AHIRRAO International Journal of Engineering Research & Technology (IJERT) A Review on an Efficient Approach to Manage Small Files in Distributed File Systems ISSN: 2278 -0181, Volume 5, Issue 10 SIEM Computer
Mr. Umesh Pawar International Journal of Modern Trends in Engineering & Research (IJMTER) IOT Based Application for Smart City Implementation ISSN (Online): 2349-9745 SIEM Computer
Mr. Umesh Pawar International Journal of Modern Trends in Engineering & Research (IJMTER) REVIEW ON-DESIGN AND IMPLEMENTATION OF OUTDOOR AND INDOOR
CAMPUS NAVIGATION SYSTEM
ISSN (Online): 2349-9745 SIEM Computer
Mr. A. R. Gaidhani International Journal of Computer Applications and Information Technology Smartphone Based Vehicle Tracking And Accident Prevention system (ISSN:2278-7720) SIEM Computer
Mr. A. R. Gaidhani “International Journal of modern Trends in Engineering and Research Review On- CROWD WISDOM MANAGEMENT ISSN:2349-9745 SIEM Computer
Mr. A. R. Gaidhani INTERNATIONAL JOURNAL ON EMERGING TRENDS IN TECHNOLOGY A Review On Secure Wall Post Sharing In Social Networking Environment 1093-1096 SIEM Computer
Mr. A. R. Gaidhani International Journal for Modern trends and Engineering research System for Visitor Pass ISSN:2349-9745 SIEM Computer
Mr. Amit Patil International Journal of Innovative Research in Computer and Communication Engineering (IJIRCCE) Implementation of RFID Based Campus Management System NA SIEM Computer
Mr. Amit Patil International Journal of Research in Applied Science and Engineering Technology (IJRASET) Secure Searching Encrypted Data Over The Cloud NA SIEM Computer
Mr. Avinash Taskar International Journal of Modern Trends in Engineering & Research (IJMTER) LOG BASED ANALYTICAL ENGINE USING HADOOP AND SPARK ISSN(Online): 2349-9745 SIEM Computer
Mr. Avinash Taskar International Journal of nnovative Research in computer
and Communication Engineering (IJIRCCE)
Implementation of Log Based Analytical Engine using Hadoop and Spark ISSN(Online): 2320-9801 SIEM Computer
Mr. Mahesh V Korade International Journal of Modern Trends in Engineering & Research (IJMTER) A Review On – Surveillance Robot using Raspberry-PI Technology ISSN (Online): 2349-9745 SIEM Computer
Mr. Mahesh V Korade International Research Journal of Engineering and Technology (IRJET) A Implementation on – Surveillance Robot using Raspberry-PI Technology e-ISSN: 2395 -0056 SIEM Computer
Mr. Piyush Kulkarni International Research Journal of Engineering & Technology(IRJET) A Review On 8D Problem Solving Process ISSN (Online): 2395-0056 SIEM Computer
Mr. Sachin D. Ubarhande International Journal Security in wireless ad hoc network 1743-8209 SIEM Computer
Mr. Sachin D. Ubarhande International Journal A Secure Path Selection Scheme for Mobile Ad Hoc 1572-834X SIEM Computer
Mr. Sujit A. AHIRRAO International Journal for Scientific Research & Development (IJSRD) Implementation on TOUCH & PAY: USING NEAR FIELD COMMUNICATION ISSN 2321-0613, Vol. 5, Issue 02 SIEM Computer
Mr. Abhay R. Gaidhani International Journal for research in Applied Science & Engineering Technology(IJRASET) NewsReader Application for Blind People using Text to Speech Synthesis 2321-9653 SIEM Computer
Mr. Abhay R. Gaidhani IJRASET Implementation On- CROWD WISDOM MANAGEMENT ISSN:2321-9653 SIEM Computer
Mr. Avinash R. Potdar International Journal for Research in Engineering Application & Management An IOT Based Farming By Using Arduino Technology ISSN : 2454-9150 SIEM Computer
Mr. Avinash Taskar international Journal for Research in Applied Science & Engineering Technology IOT-Enabled Air Pollution Meter with Digital Dashboard on Smart-Phone for Vehicles ISSN(Online): 2321-9653 SIEM Computer
Mr. Dattatray S. Shingate INTERNATIONAL JOURNAL OF PURE AND
APPLIED RESEARCH IN ENGINEERING AND
TECHNOLOGY
SECURING MOBILE SYSTEM LOCATIONS BY ANONYMOUS SERVER DESIGN
BASED ON K OPTIMAL PRINCIPLE
ISSN: 2319-507X Volume 2 (8): 208-218 SIEM Computer
Mr. Piyush R.Kulkarni International Journal of Innovative Research In Computer & Communication Engineering(IJIRCCE) Android Based Travel Route Recommendation Using Real Time Positioning ISSN(Online):2320-9801 SIEM Computer

International Paper Presentations


Name of Faculty Name of International Journal Title of Journal ISBN/ISJN No.& Page No. College Name Department
Dr. A. D. Lokhande Global International (ICT) Standardization Forum for India Remanufacturing Strategy in Industries SIEM, Nashik Mechanical Engineering
Dr. A. D. Lokhande International conference on Industrial Engineering Remanufacturing – A Review and Future Research Needs SIEM, Nashik Mechanical Engineering
Dr. A. D. Lokhande International conference on Industrial Engineering Identification and Evaluation of Performance Measure Factors for Remanufacturing Industry SIEM, Nashik Mechanical Engineering
Dr. A. D. Lokhande ISET2016 International Conference on Energy Systems and Developments ICESD2017 Performance measurement Factors for Establishing Remanufacturing Industry in India SIEM, Nashik Mechanical Engineering
Dr. A. D. Lokhande International conference on Science and Technology for Sustainable Development Development of demand based remanufacturing industry model in India SIEM, Nashik Mechanical Engineering
Dr. A. D. Lokhande International Conference on Emerging Trends in Mechanical Engineering (ICETiME-2016) ), Effect of critical factors on performance measures for establishing remanufacturing industry in India SIEM, Nashik Mechanical Engineering
Dr. A. D. Lokhande 11th ISDSI International Conference on Global Sustainability path for Globalisation Linkage between Effort Factors and Organizational Performance: Remanufacturing Industry SIEM, Nashik Mechanical Engineering
Dr. A. D. Lokhande International Conference on Emerging Trends in Mechanical Engineering Performance Measurement of Remanufacturing Industry in India: The Automotive Sector SIEM, Nashik Mechanical Engineering
Dr. A. D. Lokhande Journal of Applied Engineering Research (IJAER), Identification and Evaluation of Critical Factors for Performance Improvement for Remanufacturing Industry”-A Pilot Study ISSN0973-4562 SIEM, Nashik Mechanical Engineering
Dr. A. D. Lokhande International Journal of Current Engineering and Technology, INPRESSCO, IJCET Design & Development of clamping fixture for drilling of boiler tube plate E-ISSN2277-4106, P-ISSN 2347-5161 SIEM, Nashik Mechanical Engineering
Dr. A. D. Lokhande International Journal of Engineering Research and General Science Design of clamping fixture for drilling of boiler tube plate ISSN2091-2730 SIEM, Nashik Mechanical Engineering
Dr. A. D. Lokhande Industrial Engineering Journal Design of Framework for Implementation of CSFs in Remanufacturing Industries for Performance Improvement ISSN0970-2555 SIEM, Nashik Mechanical Engineering
Dr. A. D. Lokhande International Journal of Scientific Review and Research in Engineering and Technology(IJSRRET) Vendor Evaluation using MCDM Method ISSN2455-3603 SIEM, Nashik Mechanical Engineering
Dr. A. D. Lokhande International Journal of Management and Research Linkage between Effort Factors and Organizational Performance: Remanufacturing Industry ISSN2394-6423 SIEM, Nashik Mechanical Engineering
Dr. A. D. Lokhande International Journal of Entrepreneurship & Business Environment perspective A Review on Critical Succss Factors of Re-Manufacturing. ISSN2279-0918 SIEM, Nashik Mechanical Engineering
Dr. A. D. Lokhande International Journal of research in Engineering Application & Management. A Review on Material Selection For Mechanical Seals. SIEM, Nashik Mechanical Engineering
Dr. G. G. Waghmare International conference on recent trends in engineering and technology, Chndawad (Elsevier) Thermoeconomic optimization of a shell and tube condenser using teaching-learning-based optimization algorithm —- SIEM, Nashik Mechanical Engineering
Dr. G. G. Waghmare Adavnced Engineering Optimization Using Intelligent Techniques Optimum design of PID controller using Teaching-Learning-Based Optimization Algorithm —- SIEM, Nashik Mechanical Engineering
Dr. G. G. Waghmare International conference on FICTA, Bhubneshawar (Springer) Solving composite test functions using Teaching-Learning-Based Optimization Algorithm 978-3-642-35314-7 SIEM, Nashik Mechanical Engineering
Dr. G. G. Waghmare Engineering Optimization (Taylor & Francis) A new optimization algorithm for solving complex constrained design optimization problems 1029-0273 SIEM, Nashik Mechanical Engineering
Dr. G. G. Waghmare Applied Thermal Engineering (Elsevier) Multi-objective design optimization of a plate-fin heat sink using a teching-learning-based optimization algorithm 1359-4311 SIEM, Nashik Mechanical Engineering
Dr. G. G. Waghmare Advanced Robotics (Taylor & Francis) Design optimization of robot grippers using teching-learning-based optimization algorithm 1568-5535 SIEM, Nashik Mechanical Engineering
Dr. G. G. Waghmare Cogent Engineering (Taylor & Francis) Optimization of thermal performance of smooth flat-plate solar air hetaer using teching-learning-based optimization algorithm 2331-1916 SIEM, Nashik Mechanical Engineering
Dr. G. G. Waghmare Journal of King Saud University-Computer and Information Sciences. (Elsevier) A comparative study of a teaching-learning-based optimization algorithm on multi-objective unconstrained and constrained functions 1319-1578 SIEM,Nashik Mechanical Engineering
Dr. G. G. Waghmare Applied Mathematical Modelling (Elsevier) Parameter optimization of selected casting processes using teaching-learning-based optimization algorithm 0307-904X SIEM, Nashik Mechanical Engineering
Dr. G. G. Waghmare International Journal of Metaheuristics (Inderscience) Complex constrained design optimization sing an elitist teaching-learning-based optimization algorithm 1755-2184 SIEM,

Nashik

Mechanical Engineering
Dr. G. G. Waghmare Information Sciences (Elsevier) Comments on ” A note of Teaching-Learning-Based Optimization Algorithm” 0020-0255 SIEM,

Nashik

Mechanical Engineering
Dr. L. K. Toke International Journal of Scientific Review and Research in Engineering and Technology(IJSRRET) Vendor Evaluation using MCDM Method ISSN2455-3603 SIEM,

Nashik

Mechanical Engineering
Dr. L. K. Toke International Research Journal of Engineering and Technology (IRJET) OPTIMIZATION OF DEMAND BASED REMANUFACTURING COST ESTIMATION MODEL e-ISSN: 2395 -0056, p-ISSN: 2395-0072 SIEM,

Nashik

Mechanical Engineering
Dr. L. K. Toke International Journal of Emerging Technologies in Computational and Applied Sciences STUDY ON OPTIMAL VOLTAGE FOR PZT ACTUATOR IN VIBRATION CONTROL OF CANTILEVER BEAM USING ANSYS ISSN(Print): 2279-0047, ISSN (Online): 2279-0055 SIEM,

Nashik

Mechanical Engineering
Dr. L. K. Toke International Journal of Emerging Technologies in Computational and Applied Sciences Green supply chain management: practices, performance and pressure within manufacturing industry ISSN(Print): 2279-0047 SIEM,

Nashik

Mechanical Engineering
Dr. L. K. Toke International Journal of Applied Sciences and Engineering Research An empirical study of green supply chain management in Indian Context ISSN2277 – 9442 SIEM, Nashik Mechanical Engineering
Dr. L. K. Toke International Journal for Scientific Research & Development Design and Fabrication of an Autocutter for Rubber Sheet Cutting ISSN(online): 2321-0613 SIEM, Nashik Mechanical Engineering
Dr. L. K. Toke International Journal of Emerging Technologies in Computational and Applied Sciences Study on optimal voltage for PZT actuator in vibration control of cantilever beam using ANSYS Issue 17, Vol. 1 and 2279-0047 SIEM, Nashik Mechanical Engineering
Dr. M. D. Pasarkar National Journal Serial Publications Study of die and punch for enhancing life-A review” published in Journal of Modern Manufacturing Technology 4(1) SIEM, Nashik Mechanical Engineering
Dr. M. D. Pasarkar International Journal IJAMS Design and Analysis of different Punch Shapes and clearances for enhancing life 3(1) SIEM, Nashik Mechanical Engineering
Dr. M. D. Pasarkar International Journal of Emerging Technology and Advanced Engineering IJETAE Failure Analysis of Flange Coupling In Industry Issue-5, Vol 2 and ISSN 2250–2459 SIEM, Nashik Mechanical Engineering
Dr. M. D. Pasarkar International Journal of Innovative Technology and Exploring Engineering (IJITEE) Tool design for oval punching Issue-2, Vol 1 andISSN:2278-3075, SIEM, Nashik Mechanical Engineering
Dr. M. D. Pasarkar International Journal of Emerging Science & Engineering Deformation of CAD surface models using programming approach: A Review Issue-5, Vol-2 and ISSN: 2319–6378. SIEM, Nashik Mechanical Engineering
Dr. M. D. Pasarkar International Journal of Graphics and Image Processing Manipulation of control points for developing different shapes in cad models Issue-3, Vol 4 and ISSN: 2249– 5452 SIEM, Nashik Mechanical Engineering
Dr. M. D. Pasarkar International Journal on Resent Technologies in Mechanical and Electrical Engineering, (IJRMEE) Static analysis of Crankcase and Crankshaft of single cylinder four stroke diesel engine Issue-5, Vol 1 and ISSN 2349–7947 SIEM, Nashik Mechanical Engineering
Dr. M. D. Pasarkar Journal of Multidisciplinary Engineering Sciences and Technology, (JMEST) Analyzing and identifying various approaches for crankshaft failures-A state of the art review Issue-2, Vol 2 and ISSN 3159-0040 SIEM, Nashik Mechanical Engineering
Dr. M. D. Pasarkar International Journal on Resent Technologies in Mechanical and Electrical Engineering, (IJRMEE) Deformation of CAD surface models in real time environment for product design and Development using CUSUMA tool” Issue-5, Vol 2 and ISSN 2349–7947 SIEM, Nashik Mechanical Engineering
Dr. M. D. Pasarkar ELK Asia Pacific Journal of Mechanical Engineering Research, (JMER) Manipulation of profile of curve using CUSUMA: A curve Surface Manipulation Tool Issue-2, Vol 1 and ISSN 2394-9368. SIEM, Nashik Mechanical Engineering
Dr. M. D. Pasarkar SSRG’s International Journal of Mechanical Engineering Reduction in paint booth floor vibrations using experimental modal analysis ISSN: 2348 – 8360 SIEM, Nashik Mechanical Engineering
Dr. M. D. Pasarkar Special issue of International Journal of Innovative and Emerging Research in Engineering, ICSTSD 2016 A review on dry sliding wear characteristics of PTFE and its composites with filler Reinforcement Vol 3 SIEM, Nashik Mechanical Engineering
Dr. M. P. Ray 30th International Symposium on Shock Waves Effect of flux evaluation schemes in numerical simulation of Shockwave-gas cylinder interaction SIEM, Nashik Mechanical Engineering
Dr. M. P. Ray 31st International Symposium on Shock Waves, Tel-Aviv, Israel. A numerical investigation of shockwave-cylindrical gas Inhomogeneity interaction for convergent and divergent geometrie SIEM, Nashik Mechanical Engineering
Dr. M. P. Ray ETIME Heat Transfer & Its Effect During Fire —- SIEM, Nashik Mechanical Engineering
Dr. M. P. Ray International Journal of Computational Methods. Development and assessment of several high-resolution Schemes for compressible Euler equations. SIEM, Nashik Mechanical Engineering
Prof. A. P. Borhade International Journal of Modern Trends in Engineering and Research Method to Neglect Spatter Generation Effect Due to CO2 Welding ISSN(Online):2349–9745; ISSN (Print):2393-8161 SIEM, Nashik Mechanical Engineering
Prof. A. P. Borhade International Journal of Engineering Research & Technology (IJERT) Dynamic Analysis of Steel Leaf Spring ISSN: 2278-0181 SIEM, Nashik Mechanical Engineering
Prof. A. S. Dube International Conference on Quality Up- gradation on Engineering Science & Technologu Performance Evaluation of Vapour Compression Cycle Operating on LPG as a Refrigerant —- SIEM, Nashik Mechanical Engineering
Prof. A. S. Dube ICRTET-2014 Proceedings Barriers for Green Supply Chain Management Implementation 978-93-5107-222-5 SIEM, Nashik Mechanical Engineering
Prof. A. S. Dube International Journal of Computer Applications Green Supply Chain management – A literature review Vol 2,ISSN 0975 – 8887 SIEM, Nashik Mechanical Engineering
Prof. A. S. Dube International Journal of Research In Advent Technology A Review on Evaporative Cooling Technology ISSN2321-9637 SIEM, Nashik Mechanical Engineering
Prof. A. S. Dube International Journal for Research in Engineering & Management Study of Green Supply Chain Practices and Its Performance Evaluation Vol 3,ISSN 2321-9637 SIEM, Nashik Mechanical Engineering
Prof. A. S. Dube Benchmarking: An International ISM-fuzzy MICMAC approach for analysis of GSCM enablers Vol 24 SIEM, Nashik Mechanical Engineering
Prof. A. S. Dube Benchmarking: An International Analysis of green supply chain barriers using integrated ISM-fuzzy MICMAC approach Vol 23 SIEM, Nashik Mechanical Engineering
Prof. A. S. Dube International Journal on Emerging trends and Technology Ranking of Green Practices using Interpretive Structural Modeling ISSN2455-0124 SIEM, Nashik Mechanical Engineering
Prof. A. S. Maheshwari WPMC –Manufacturing Engineering Track December 13-16, 2015, Hyderabad Effect of Newly Designed Burnishing Tool on Surface Microhardness of AA6351 —- SIEM,Nashik Mechanical Engineering
Prof. A. S. Maheshwari —- Effect of Newly Developed Ball Burnishing Tool on Surface Roughness of Al 6351 0976-7967 SIEM, Nashik Mechanical Engineering
Prof. A. S. Maheshwari International Conference on Industrial Engineering(ICIE-2013) Nov. 20-22, 2013 S.V. National Institute of Technology, Surat – 395 007, Gujarat, India Study and Prediction of Ball Burnishing Parameters to Improve Surface Roughness”-Using Artificial Neural Network —- SIEM, Nashik Mechanical Engineering
Prof. A. S. Maheshwari Jordon Journal of Mechanical and Industrial Engineering (JJMIE) Improving Surface quality of AA 6351 by the Stiff Burnishing Technique ISSN1995-6665 SIEM, Nashik Mechanical Engineering
Prof. A. S. Maheshwari International Journal of Engineering Research and Development The Role of Burnishing Process in Manufacturing Industry-A State of the Art Survey- e-ISSN2278067x SIEM, Nashik Mechanical Engineering
Prof. A. S. Maheshwari Materials Today Proceedings (Elsevier) Influence of specially designed high-stiffness ball burnishing tool on surface quality of Titanium alloy ISSN2214-7853 SIEM, Nashik Mechanical Engineering
Prof. A. S. Maheshwari International Journal of Energing Trends in Technology Surface Hardness Improving Using Stiff Ball Burnishing 2455-0124 SIEM, Nashik Mechanical Engineering
Prof. Ankit Kumar International Conference on Emerging Trends in Engineering and Management Research Average Improver kit for I.C.Engine 978-81-932074-7-5 SIEM, Nashik Mechanical Engineering
Prof. Ankit Kumar International Conference on Emerging Trends in Engineering and Management Research fuel from Waste Plastic 978-81-932074-7-6 SIEM, Nashik Mechanical Engineering
Prof. Ankit Kumar International Conference on Emerging Trends in Engineering and Management Research The analysis of S.I engine on Methanol with Petrol as a fuel 978-81-932074-7-7 SIEM, Nashik Mechanical Engineering
Prof. Ankit Kumar International Conference on Emerging Trends in Engineering and Management Research Hybrid Air Conditioning for better energy economic consumption 978-81-932074-7-5 SIEM, Nashik Mechanical Engineering
Prof. Ankit Kumar International Journal of Innovative Research in Science and Engineering Design of Abrasive cut 2454-9665 SIEM, Nashik Mechanical Engineering
Prof. Ankit Kumar International Journal of Advanced Technology in Engineering and Science hybrid Air conditioning for Better Economic Consumption 2348-7550 SIEM, Nashik Mechanical Engineering
Prof. Ankit Kumar International Journal of Advanced Research in Science and Engineering Fuel From Waste Plastic 2319-8354 SIEM, Nashik Mechanical Engineering
Prof. Ankit Kumar International Journal of Advanced Research in Science and Engineering Study of Wind mill Water Pump 2319-8354 SIEM, Nashik Mechanical Engineering
Prof. Ankit Kumar International Journal of Advanced Research in Science and Engineering Avarage Improver Kit for I.C.Engine 2319-8354 SIEM, Nashik Mechanical Engineering
Prof. Ankit Kumar International Journal of Advanced Research in Science and Engineering The analysis of S.I engine on methanol with petrol as fuel 2319-8355 SIEM, Nashik Mechanical Engineering
Prof. Ankit Kumar International Journal of Advanced Research in Science and Engineering hybrid Air conditioning for Better Economic Consumption 2348-7550 SIEM, Nashik Mechanical Engineering
Prof. B. M. Dusane International Journal of Innovation Science, engineering & technology. An effect of nanofluids on enhancement of characteristics of plate heat exchanger. ISSN2348-7968 SIEM, Nashik Mechanical Engineering
Prof. B. M. Dusane International Journal of merging Research in management & Technology. Application of adsorption Refrigeration Cycle ISSN2278-9359 SIEM, Nashik Mechanical Engineering
Prof. B. M. Dusane IOSR Journal of Engineering. A Review on Solar Absorption Refrigeration System. ISSN2250-3021 SIEM, Nashik Mechanical Engineering
Prof. B. M. Dusane International research Journal of Engineering & Technology. Construction and Analysis of Tube in Tube Type Heat Exchanger. ISSN2395-0056 SIEM, Nashik Mechanical Engineering
Prof. B. M. Dusane International Journal of Modern Trends in Engineering & Research. Application of ZnO in car Radiator ISSN2349-9745 SIEM, Nashik Mechanical Engineering
Prof. D. B. Uphade 16th International Refrigeration and Air-Conditioning Conference at Purdue Thermoelectric Multi-Utility Water Heater cum Air-Conditioner 9781510828735 SIEM, Nashik Mechanical Engineering
Prof. D. B. Uphade 16th International Refrigeration and Air-Conditioning Conference at Purdue Heat Pump for Energy Efficient SCJ Freeze Pre-Concentration System 9781510828735 SIEM, Nashik Mechanical Engineering
Prof. D. B. Uphade 5th International Conference on Advances in Energy Research, ESE, IIT Bombay Energy Efficient Jaggery Making using Freeze Pre-concentration of SCJ —- SIEM, Nashik Mechanical Engineering
Prof. D. B. Uphade Journal of Energy Procedia Energy Efficient Jaggery Making using Freeze Pre-concentration of SCJ 18766102 SIEM, Nashik Mechanical Engineering
Prof. K. S. Patil International Journal on Emerging Research in Management Technology. Framework For Supply Chain Performance Evaluation -SCOR ISSN2278-9359 SIEM, Nashik Mechanical Engineering
Prof. K. S. Patil International Journal on Emerging Research in Management Technology. Transportation Planning & Validation of Surface Transportation Models in Houston, Texas, through Implementation of a Traffic Network Simulation Enhanced by Transportation Analysis Simulation System. ISSN2278-9359 SIEM, Nashik Mechanical Engineering
Prof. Kiran More SWICON Dynamic Mesh Analysis of Gas Circuit Breaker with moving electrical contact —- SIEM, Nashik Mechanical Engineering
Prof. Kunal U. Shinde International Conference on Quality Up-gradation in Engineering, Science & Technology(ICQUEST-2016) Study of Green Supply Chain Practices and It’s Performance Evaluation ISBN:978-81-923623-1-1 1 SIEM, Nashik Mechanical Engineering
Prof. Kunal U. Shinde International Journal FOR RESEARCH IN ENGINEERING APPLICATION AND MANAGEMENT STUDY OF GREEN SUPPLY CHAIN PRACTICES AND ITS PERFORMANCE EVALUATION ISSN:2494-9150 SIEM, Nashik Mechanical Engineering
Prof. Kunal U. Shinde International Journal OF ENGINEERING AND SCIENCE RESEARCH ACOUSTIC ANALYSIS OF MUFFLER ISSN:2277-2685 SIEM, Nashik Mechanical Engineering
Prof. Kunal U. Shinde International Journal of Engineering & Science Research Acoustic Analysis of Muffler ISSN:2277-2685 SIEM, Nashik Mechanical Engineering
Prof. Lalit N. Patil International Journal of Scientific Research Engineering & Technology (IJSRET) Wear Studies on Composite Bearing Balls – An ANN Approach ISSN2278 – 0882 SIEM, Nashik Mechanical Engineering
Prof. Lalit N. Patil International Journal of Recent Research in Civil and Mechanical Engineering (IJRRCME) Design & Development of Injection Mold Using Flow Analysis and Higher End Design Software ISSN2393-8471 SIEM, Nashik Mechanical Engineering
Prof. Lalit N. Patil Int. Journal of Engineering Research and Applications A Wear Analysis of Composite Ball Materials using Tribometer ISSN: 2248-9622 SIEM, Nashik Mechanical Engineering
Prof. Lalit N. Patil International Journal of Engineering Research & Technology (IJERT) Wear Prediction Model for Composite Bearing Balls under Pure Sliding Contact Condition ISSN: 2278-0181 SIEM, Nashik Mechanical Engineering
Prof. M. S. Mhaske International Journal of research in Engineering & Technology. Detection of Crack Location & Depth in a cantilever Beam by Vibration Measurement & it’s Comparative Validation in ANN GA ISSN2319-1163 SIEM, Nashik Mechanical Engineering
Prof. N. L. Bhirud International Conference on Quality Up-gradation in Engineering, Science & Technology(ICQUEST-2015) Alternative Techniques for Reducing the Use of Cutting Fluids ISBN:978-81-923623-1-1 1 SIEM, Nashik Mechanical Engineering
Prof. N. L. Bhirud International Conference on Quality Up-gradation in Engineering, Science and Technology (ICQUEST2015) Performance evaluation of Vapour Compression cycle operating LPG as a refrigerant. —- SIEM, Nashik Mechanical Engineering
Prof. N. L. Bhirud Use of MQCL for Milling processes-A review and discussion Issue 7 (ii), Vol.1,ISSN 2249-7455 SIEM, Nashik Mechanical Engineering
Prof. N. L. Bhirud International Journal of Advance Research in Science and Engineering Applications of cylindrical and radial heat sinks for cooling of LED light bulbs Vol. No.4,Special Issue (01),ISSN-2319-8354(E) SIEM, Nashik Mechanical Engineering
Prof. N. L. Bhirud International Journal of Advances in Energy Research (AER–2006) Field Evaluation of Fixed-Focus Concentrators for industrial oven SIEM, Nashik Mechanical Engineering
Prof. N. L. Bhirud International Journal on Emerging Trends in Technology (IJETT) Use of RSM for design of experiments and optimization of Parameters in Milling operations. Issue 2, Vol 3ISSN 2455 – 0124 SIEM, Nashik Mechanical Engineering
Prof. N. N. Sarode International Research Conference on Advances in Business, Management, Engineering, Technology nad Social Science Design & Analysis of Machining & Inspection Fixture used for CAM Shaft CRANK Shaft in Industry ISSN: 2249-7455 SIEM, Nashik Mechanical Engineering
Prof. N. N. Sarode International Conference on Recent Trends in Engineering Sciences ICRTES’13 Design of Fixture for CAM Shaft & Crank Shaft to Reduce Production Time in Automobile Industry SIEM, Nashik Mechanical Engineering
Prof. N. N. Sarode Satellite Conference ICSTSD-2016 Testing and Performance Assessment of 1KWp Solar Rooftop System SIEM, Nashik Mechanical Engineering
Prof. P. M. Sutar International Research Journal of Engineering and Technology A Review on replacement of conventional grinding wheels with super abrasive grinding wheels Volume 3,Issue 3,ISSN 2395-0056 SIEM, Nashik Mechanical Engineering
Prof. P. M. Sutar International Journal of Applied Chemistry Acrylonitrile Butadiene Styrene Parts Produced by Fused Deposition Modelling Volume 11,Issue 2,ISSN 0973-1792 SIEM, Nashik Mechanical Engineering
Prof. P. M. Sutar International Journal of Research in Engineering and Technology Synthesis of Composite Polymer for Industrial Application Volume 4,Issue 10,ISSN 2319-1163 SIEM, Nashik Mechanical Engineering
Prof. R. D. Pawar International Journal of Engineering ,Education & Technology. Review on Vortex Tube Refrigeration. ISSN2320-883X SIEM, Nashik Mechanical Engineering
Prof. S. B. Ambekar International Conference on Recent Trends in Engineering Science and Management (ICRTESM-2015) STUDY OF CRYOGENIC ROCKET ENGINE 978-81-931039-2-0 SIEM, Nashik Mechanical Engineering
Prof. S. B. Ambekar International Conference on Recent Trends in Engineering Science and Management (ICRTESM-2015) DESIGN OF WELDING ROTATOR 978-81-931039-2-0 SIEM, Nashik Mechanical Engineering
Prof. S. B. Ambekar IJSRD – International Journal for Scientific Research & Development Auto Washing Mechanism of Heat Treated Blanks ISSN(online): 2321-0613 SIEM,Nashik Mechanical Engineering
Prof. S. B. Ambekar International Research Journal of Engineering and Technology A Review Paper on Flexible Spring Conveyor System for Material Handling System. ISSN No. 2395 -0056 SIEM, Nashik Mechanical Engineering
Prof. S. B. Ambekar International Research Journal of Engineering and Technology REVIEW ON DIFFERENT TECHNOLOGIES FOR COAL LIQUEFACTION ISSN No. 2395 -0056 SIEM, Nashik Mechanical Engineering
Prof. S. B. Ambekar International Journal of Advanced Technology in Engineering and Science DESIGN OF WELDING ROTATOR ISSN No. 2348-7550 SIEM, Nashik Mechanical Engineering
Prof. S. B. Ambekar International Journal of Advanced Technology in Engineering and Science STUDY OF CRYOGENIC ROCKET ENGINE ISSN No. 2348-7550 SIEM, Nashik Mechanical Engineering
Prof. S. B. Ambekar International Journal of Engineering and Innovative Technology (IJEIT) A Review: Implementation of Failure Mode and Effect Analysis ISSN No. 2277-3754 SIEM, Nashik Mechanical Engineering
Prof. S. J. Chede International Conference ICAET 2014 Friction Surfacing and Friction Stir Welding : An Overview —- SIEM, Nashik Mechanical Engineering
Prof. S. J. Chede International Journal of Advance Engineering, Management and Science (IJAEMS) Experimental Analysis using Established Parameters for Cryogenic Treatment on High Speed Steel Tool ISSN: 2454-1311 SIEM, Nashik Mechanical Engineering
Prof. S. M. Mahajan International Journal of Computational Engineering Research Aluminum Foaming For Lighter Structure ISSN(e): 2250 – 3005 SIEM, Nashik Mechanical Engineering
Prof. S. M. Mahajan International Journal of Applied Electromagnetics and Mechanics Single Ram Single Pull Hydraulic Jack for Restressing Application SIEM, Nashik Mechanical Engineering
Prof. S. M. Mahajan International Journal of Engineering Science and Innovative Technology Head up Display Techniques in Cars ISSN: 2319-5967 SIEM, Nashik Mechanical Engineering
Prof. S. M. Mahajan International Journal of Advanced Technology in Engineering and Science A REVIEW ON HYPERSONIC AIRCRAFT ISSN: 2348 – 7550 SIEM, Nashik Mechanical Engineering
Prof. S. M. Mahajan International Journal of Engineering Research and Development High Pressure Silent Screw Pump with Zero Maintenance ISSN:2278-067X SIEM, Nashik Mechanical Engineering
Prof. S. M. Mahajan IJAMTES Design Optimization of liquid Carrier Tanker for Reduction of sloshing Impacts ISSN: 2249-7455 SIEM, Nashik Mechanical Engineering
Prof. S. M. Mahajan International Journal of Innovative Technology and Exploring Engineering Efficient Use of Renewable Energy in Train & Railway Station E ISSN: 2278-3075 SIEM, Nashik Mechanical Engineering
Prof. S. M. Mahajan International Journal of Engineering Research & Technology (IJERT) Renewable Delhi Metro ISSN0974-3154 SIEM, Nashik Mechanical Engineering
Prof. S. M. Mahajan International Journal of Engineering Research and Development Alternative Fuel Public Transport Buses e-ISSN: 2278-067X SIEM, Nashik Mechanical Engineering
Prof. S. M. Mahajan International Organization of Scientific Research Review on Design Optimization of Liquid Carrier Tanker for Reduction of Sloshing Effects e-ISSN:2278-1684 SIEM, Nashik Mechanical Engineering
Prof. S. M. Mahajan —- Deep Cryogenic Treatment on Electrode —- SIEM, Nashik Mechanical Engineering
Prof. S. M. Mahajan —- Review on Design Optimization of Liquid Carrier Tanker for Reduction of Sloshing Effects —- SIEM, Nashik Mechanical Engineering
Prof. S. S. Pote International Conference on Recent Trends & Research in Engineering & Science(ICRTRES -2017), Optimization of Spot Weld in Steel Component using FEA Technique —- SIEM, Nashik Mechanical Engineering
Prof. S. S. Pote International Journal of Engineering and Management Research Review Study of Analysis of Industrial Brackets using FEA Software ISSN(Online): 2250-0758 SIEM, Nashik Mechanical Engineering
Prof. S. S. Pote International Journal for Innovative Research in Multidisciplinary Field Study of testing Methods for Spur Gear ISSN– 2455 – 0620 SIEM, Nashik Mechanical Engineering
Prof. S. S. Pote International Journal for Innovative Research in Multidisciplinary Field SPOT WELD OPTIMIZATION IN WHEEL RIM ISSN– 2455 – 0620 SIEM, Nashik Mechanical Engineering
Prof. S. S. Pote International Journal for Innovative Research in Multidisciplinary Field Review of Experiment on Spiral Heat Exchanger ISSN– 2455 – 0620 SIEM, Nashik Mechanical Engineering
Prof. S. S. Pote International Journal for Innovative Research in Multidisciplinary Field SPOT WELD ANALYSIS OF AN AUTOMOBILE RIM ISSN– 2455 – 0620 SIEM, Nashik Mechanical Engineering
Prof. S. S. Pote International Journal for Scientific Research & Development Spot Weld Optimization of Rim on Dynamic Cornering Fatigue Test ISSN(online): 2321-0613 SIEM, Nashik Mechanical Engineering
Prof. S. S. Pote International Journal FOR TECHNOLOGICAL RESEARCH IN ENGINEERING REVIEW PAPER ON EFFECT OF PARALLEL AND SERIES HEAT EXCHANGER ON PERFORMANCE OF DIESEL ENGINE ISSN(Online): 2347 – 4718 SIEM, Nashik Mechanical Engineering
Prof. S. S. Pote International Journal of Engineering & Science Research ACOUSTIC ANALYSIS OF MUFFLER ISSN 2277-2685 SIEM, Nashik Mechanical Engineering
Prof. S. S. Pote International Journal OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY STUDY OF INFLUENCE OF PRESSURE AND LOAD ON WHEEL RIM BY RADIAL fatigue test ISSN: 2277-9655 SIEM, Nashik Mechanical Engineering
Prof. S. S. Pote International Conference on Recent Trends & Research in Engineering & Science (ICRTRES -2017), Multi Objective Analysis Approach for Optimization of Steel Wheel Using FEA Method —- SIEM, Nashik Mechanical Engineering
Prof. S. S. Pote International Conference On Global Trends In Engineering, Technology And Management 2016 (ICGTETM 2016) A Review On Steering Knuckle Analysis —- SIEM, Nashik Mechanical Engineering
Prof. U. V. Patil IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) Process Parameter Optimization of Bead geometry for AISI 446 in GMAW Process Using Grey-based Taguchi Method e-ISSN: 2278-1684, p-ISSN: 2320-334X SIEM, Nashik Mechanical Engineering
Prof. V. A. Kolhe International Journal of Engineering Science Friction Surfacing & Friction Stir Welding :An overview 129-136 SIEM, Nashik Mechanical Engineering
Prof. V. A. Kolhe International Journal on Emerging Trends in Technology. Friction Stir Welding & Processing : an Overview ISSN2350-0808 SIEM, Nashik Mechanical Engineering

National Paper Presentations


>
</table

Name of Faculty Name of National Conference/ Journal Title of Paper ISBN/ISJN No.& Page No. College Name Department
Dr. A. D. Lokhande National Conference on Industrial Engineering & Technology Management Development of an instrument used to evaluate performance measure factors for remanufacturing industry in India SIEM, Nashik Mechanical Engineering
Dr. A. D. Lokhande “Quality Progress – 2014” Critical Success Factors and Performance Measurement Factors of Remanufacturing Industries- a Pilot Study SIEM, Nashik Mechanical Engineering
Dr. A. D. Lokhande National Conference on Innovations in Mechanical Engineering, NCIME-2016 Case study of Air conditioning compressor in Automobile sector SIEM, Nashik Mechanical Engineering
Dr. A. D. Lokhande National conference on Advances in Mechanical Engineering Techniques Investigate the feeder mechanism for plastic pouch printing machine used in Industrial sector SIEM, Nashik Mechanical Engineering
Dr. A. D. Lokhande 2nd National conference on Advances in Mechanical Engineering Techniques Peanut sheller using screw conveyor SIEM, Nashik Mechanical Engineering
Dr. A. D. Lokhande 2nd National conference on Advances in Mechanical Engineering Techniques Design & Development of clamping fixture for drilling of boiler tube plate SIEM, Nashik Mechanical Engineering
Dr. M. P. Ray 5th National Symposium On Shock Waves. Numerical investigation of effects of surface perturbations on shockwave-cylindrical gas Inhomogeneity interaction SIEM, Nashik Mechanical Engineering
Prof. S. J. Chede National Conference , NMD ATM 2014 Field Performance Analysis of Cryo processed Drills and Taps SIEM, Nashik Mechanical Engineering
SR. NO. NAME OF THE INVENTORS TITLE APPLICATION NO. STATUS
1 Dipak Pandurang Patil,
Utkarsh Virendra Tewari,
Anjali Ashok Singh,
Abhishek Sanjay Pandey,
Wireless Charging Platform 3621/MUM/2013
INDIA
Published
2 Dipak Pandurang Patil,
Bhat Arati Krishna,
Deore Shubhangi
Kevalrao,
Tambe Kanchan Opal,
A Sensor Network Based Real Time Vehicle Pollution Control and Speed Governance Mechanism 3622/MUM/2013
INDIA
Published
3 Risodkar Yogesh
Ramesh.,
Masharibkhan I. Joad,
Jayesh Prakash Nair,
Rohit Gupta,
Monitoring of High Voltage Transmission Line 3623/MUM/2013
INDIA
Published
4 Yogesh Ramkrishnarao
Risodkar,
Vipul Vinodrai Patel,
Anjali Govind Gaganbide,
Somya Kailashchand Gupta,
Tongue Operated Magnetic Sensor System for Physically Disabled 3624/MUM/2013
INDIA
Published
5 Bharat Dinkar Deore,
Amruta Jayant Kulkarni,
Pooja Somnath Aswale,
Jyoti Tukaram Khandbahale,
MINE DISASTER MANAGEMENT SYSTEM USING XBEE 3627/MUM/2013
INDIA
Published
6 Dipak Pandurang Patil,
Bhushan Vijay Vidhate,
Chetal Sharad Patil,
Rajendra Ramakrishna
Badgujar,
Time Based Traffic Signal Switching With Emergency
Vehicle Preemption
3630/MUM/2013
INDIA
Published
7 Dinesh Bhadane,
Prof. Vikram Ashok Kolhe, Khandbahale Satish Vishwas,
Patil Shreyas Rajendra,
Malunjkar Akash Dilip,
Chavan Sagar Ramchandra,
Centrifugal Oil Separator for Broached Components 3626/MUM/2013
INDIA
Published
8 Vinay Raghunath Kulkarni,
Sachin J. Chede,
Sachidanand Shrawan Vishwakarma,
Brijesh kumar Mahavir,
Vishwakarma
Nikhil Subhashchandra
gupta
Pradip Manoj Singh
Automated glove forming machine 3629/MUM/2013
INDIA
Published
9 Prof. R. V. Patel,
Sonawane Chetan,
Halde Sonali,
Jadhav Nilesh
AUTOMATIC PHASE SEQUENCE CHANGER 3625/MUM/2013
INDIA
Published
10 Prof. Swati K. Gajeshwar,
Sanket R. Nandan,
RAJ R. JHA,
PRASHANT G BORSE,
Deshmukh Sumeet
Real time traffic signal system based on vehicle density 3628/MUM/2013
INDIA
Published
11 Prof. Swati. K. Gajeshwar,
Rashmi V. Lokhande,
Sayali A. Jawale,
Harshali Jagdish Mungad,
Mahesh B. Gunjal.
FERRORESONANCE /CONSTANT VOLTAGE TRANSFORMER 3631/MUM/2013
INDIA
Published
12 Prof. Y. R. Risodkar,
Prof. M. K. Sangole,
PANDIT VISHAL DEVIDAS,
SAYYED MO VARISHALI ASIFALI,
SALI VISHAL DEELIP,
Automatic nutrient feeding and crop management system 3824/MUM/2014
INDIA
Published
13 Prof. Y. D. Borse,
Prof. Y. R. Risodkar,
PANDEY NIRAJKUMAR HARENDRA,
DESHPANDE KUNAL ANISH,
KULKARNI RAHUL PRAKASH,
Wireless Sensor Network for Pilgrim Tracking 3906/MUM/2014
INDIA
Published
14 Prof. K. B. Jagtap,
Prof. A. R. Chordiya,
PATIL SNEHA PRAVIN,
SALVE PRANJAL MAHENDRA,
GAIKWAD SANDEEP UTTAM,
Centralized computing and controlling of canal 3907/MUM/2014
INDIA
Published
15 Prof. B. D. Deore,
Prof. D. P. Patil,
BURAD DEVENDRA,
DONGARE VIKRAM,
GAWHANE AKSHAY,
Design of Intelligent Queue Management System for Government/Public Sectors 3913/MUM/2014
INDIA
Published
16 Prof. Y. D. Borse,
Prof. M. K. Sangole,
JOSHI NISHANT ARVIND,
MORE NIKHIL SANDIP,
KHANDELWAL SHUBHAM SANJAY,
ECG Acquisition and Heart Rate Monitoring System using a Wireless Steering Wheel 3914/MUM/2014
INDIA
Published
17 Prof. M. T. Nikam,
Prof. P. P. Chaudhari,
DHIKALE AMOL RAGHUNATH,
NIKAM RAMDAS JANARDHAN,
KALUSE DHNANJAY SHRIMANT
Automatic power factor control panel using wireless communication 168/MUM/2015
INDIA
Published
18  Prof. B. D. Deore,
Prof. M. K. Sangole,
Ankita Patil,
Khushboo Rane,
SPY Guard using RF-ID 1877/MUM/2015
INDIA
Published
19 Prof. P. R. Baviskar,
Prof. N. L. Bhirud,
Salunke Saurabh,
Sanap Sagar,
Shah Harsh,
Pavase Abhijeet,
Design and development of a machine to prepare and resize the sugarcane for sowing 3822/MUM/2014
INDIA
Published
20 Prof. P. R. Baviskar,
Prof. D. D.Shinde,
Mr. Kiran Patil,
Chavan Omkar,
Khairnar Rohit,
Borade Akash,
Kokane Prashant,
Design of Multipurpose Oil Spraying Machine 3823/MUM/2014
INDIA
Published
21 Prof. Dr. R. G. Tated
Prof. A. R. Patil,
Mr. Kiran Patil,
Kasar Suraj,
Kulkarni Rahul,
Kotgire Manik,
Enhancement in Corrosion Resistance of Connecting Rod by using Advance Shot Blasting Technique 3825/MUM/2014
INDIA
Published
22 Prof. D. D. Shinde,
Prof. N.L. Bhirud,
Mr.Kiran Patil,
Vikas M. Patil,
Hardik J. Patil,
Gandhi Mohd Rayan,
Travelling of Drum by trolley with auto-lock system based on the conversion of gravitational energy into kinetic energy 3905/MUM/2014
INDIA
Published
23 Prof. P. R. Baviskar,
Prof. V. A. Kolhe,
MR.KALE S. P,
Joshi Sayali,
Godkhe Kiran,
Avhad Pooja,
Design and Development of Screw Head Slotting Machine 3908/MUM/2014
INDIA
Published
24 Prof. P. H. Chaudhari,
Prof. S. J. Chede,
Mr. Prassana Balaji,
ABHILASH R. JOSHI,
HEMANT A. MORE,
SAGAR B. DAVHARE,
SUJEET S. MAHALE,
Design & Manufacturing of Special Purpose Machine for O.D. Turning of Connecting Rod 169/MUM/2015
INDIA
Published
25 Prof. Dr. R. G. Tated,
Prof P.S. Garudkar,
SHAHRUKH MANIYAR,
ASIF ANSARI,
HIKET PATEL,
AKSHAY DIGHE,
SHREYAS JOSHI,
AKSHAY SHELAR,
Zero Turning Steering Mechanism 170/MUM/2015
INDIA
Published
26 Prof. V. A. Kolhe,
MR. DHEERAJ LAGAD,
RAVINDRA SINGH,
PRADEEP YADAV,
DILIP YADAV,
SURENDRA YADAV
Design and Manufacturing of Gasket Cutting Machine 404/MUM/2015
INDIA
Published
27  Prof. N. L. Bhirud,
Prof. V. A. Kolhe,
Mr. A. T. Tidke,
Digambar D. Bhamare,
Amol M. Ugale,
Sarang S. Bedis,
Modification In Milling Machine & Cylindrical Grinding Machine For Extra Long Drills 1876/MUM/2015
INDIA
Published
28 Prof. R. V. Patel,
Prof. P. M. Desai,
Aditya Parihar,
Suraj Musale,
Rakesh Sawant,
Mayur Parmale,
Petrol Pump Automation System 3742/MUM/2014
INDIA
Published
29 Prof. Rajankumar R. Patel,
Prof. Piyush M. Desai,
Patil Navin,
Patil Pankaj,
Wadekar Manoj,
Mahajan Sandip,
PLC based Load Sharing of Transformer 3743/MUM/2014
INDIA
Published
30 Prof. R. V. Patel,
Prof. P. M. Desai,
Ranbhor Makarand,
Patil Amol R.,
Nawle Jyoti,
Avhad Mangal,
Poultry Automation System using Microcontroller 3744/MUM/2014
INDIA
Published
31 Prof. S. K Gajeshwar,
Prof. R.V. Patel,
Pratik Thakare,
Ankita Patil,
SachinVarade,
Avinash Baitade,
Synchronization of Alternator using PLC 3745/MUM/2014
INDIA
Published
32 JADHAV UMESH ASHOK,
JADHAV DEEPAK KIRAN,
POOJA NIGAL,
BARHATE SUMUKH VIJAY,
Access Control of Door and Home Security by Raspberry Pi through Internet 3740/MUM/2014
INDIA
Published
33 ANAND YADAV,
RANI SHARMA,
RUPALI NATHE,
SHWETA MOTE,
Disease Diagnosis in Crop using Image Processing 3741/MUM/2014
INDIA
Published
34 ASHISH S. DESHMUKH,
SABNAM MANIYAR,
MONICA JADHAV,
Online Social Networking User Wall Filter with Inference Attacks Security 3904/MUM/2014
INDIA
Published
35 Prof. N. L. Bhirud,
Shwetambari S. Ahirrao,
Prachi. D. Shinde,
The Hill Climber in Automobiles 201621011229
INDIA
Published
36 Prof. S. J. Chede,
Prof. K.S. Patil,
Muzzamil Shaikh,
Harshvardhan Wable,
Margesh Jeram,
Tinesh Kumavat
Metered hydramount oil filling machine 201621011230
INDIA
Published
37 Hardeep Singh Kohli,
Nachiket Rajendra Kulkarni,
Karim Amirali Khoja,
Pratik Sunil Kolhe,
Upraised Road Divider Painting Machine 201621011231
INDIA
Published
38 Prof. V. S. Gaikwad,
Apurv Nere,
Hemant More,
Akash Chordiya,
Priyanka Bhosale,
Design and Manufacturing of Variable Hole Saw 201621011232
INDIA
Published
39 Prof Amit Mishra,
Prof. Mosam K. Sangole,
Miss Madhuri G. Gangurde,
Miss Pooja R. Gade,
Miss Rucha S. Deshpande,
Bank Security
System using PIR
Sensor and GSM
Module
201621042292
INDIA
Filed
40 Prof A. S. Dube,
Prof C. R. Patil,
Mr. Rushikesh G. Gangurde,
Mr. Suraj R. Jadhav,
Mr. Sagar B. Nibhute,
Mr. Vishal E. Patil,
Aqua Silencer 201621042289
INDIA
Filed
41 Prof K. S. Patil,
Mr. Ashish Uttamrao Derle,
Mr. Sagar Tanaji Gawali,
Mr. Yogesh Dattatray Bhandare,
Mr. Nitin Bhagwan Pawar,
Automatic Braking with Pneumatic Bumper System using Proximity Sensor 201621042290
INDIA
Filed
42 Prof N. L. Bhirud,
Prof. Prasad Prabhakar Kulkarni,
Mr. Uddhav Sudhakar Shirsath,
Automatic Rail Waste Dump Mechanism 201621042291
INDIA
Filed
43 Prof V. A. Kolhe,
Shelke Pradeep Balasaheb,
Pekhale Vicky Shankar,
Patil Sagar Sanjay,
Design and Manufacturing of 3 Axial Unloading Dumper System 201621042293
INDIA
Filed
44 Prof Sachin J. Chede,
Mr. Shankar B. Nichit,
Ajinkya V. Nichit,
Mayur U. Thombare,
Tejas S. Pethkar,
Srivijay Ganapathy Shrinivasan,
Mechanism for Reduction of Noise and Energy Conservation
on Riveting Machine
201621042295
INDIA
Filed
45 Prof. A. S. Dube,
Mr. Harshal Nikam,
Mr. Harshal Rasal,
Mr. Rahul Burse,
Bed Air Conditioning system 201621043370
INDIA
Filed
46 Prof. P. P. Kulkarni,
Mr. Uddhav Shirsath,
Multi Blade Mixer Grinder Jar 201621043371
INDIA
Filed
47 Prof. A. S. Dube,
Kunal Dajbhau Sonawane,
Dinesh Nivrutti Chavan,
Bhushan Sanjay Deore,
Sanket Vinayak Hirve,
Multipurpose Mulching Paper Spreading Machine 201621043372
INDIA
Filed
48 Prof. Madhuraj K. Sharma,
Prasad K. Hiray,
Ajay K. Lahire,
Kshitija R Ruikar,
Load Cell based
Digital Fuel Meter
201621042294
INDIA
Filed
49 Prof. Sharmila M,
Prof. R. V. Patel,
Mangesh S. Bhalerao,
Aniket B. Pansare,
Pooja S. Gharate,
Industrial Poultry
Farming
201621042296
INDIA
Filed
50 Prof. Mosam Sangole,
Bhushan S. Nasikkar,
Dhananjay V. Kulkarni,
Gitesh K. Kakuste,
MICROCONTROLLER BASED LPG AUTOMATION SYSTEM 201721030368
INDIA
Filed
51 Chaudhari Shubham Sarjerao,
Dawoodi Joone Zainul,
Chordiya Pratik Prafulla,
Shikhare Hemant Vivek,
Design, fabrication and testing of Solar Dryer 201721030366
INDIA
Filed
52 Prof. A.S. Maheshwari,
Mr. Borse Vinay M,
Mr. Khatale Sumit N,
Mr. Kshatriya Kaustubh,
Mr. Fultankar Sanket R,
Solar Desalination Unit 201721030367
INDIA
Filed
53 Sameer Sudhir Pawar, Road bump and hole tracking system 201721033802
INDIA
Filed
54 Prof. (Dr.) Manish Dattatray Pasarkar,
Er. Saurabh Javeri,
Tushar Balu Gaidhani,
Shekhar Rajaram Dheringe,
Rupesh Rajendra Pakhale,
Vishal Ananda Patil,
Design and optimization of Pneumatically operated spray gun 201721033803
INDIA
Filed
55 Pagar Nikhil Bapu,
Bidgar Pravin Dilip,
Sharmila M,
Smart Bridge System 201721030369
INDIA
Filed
56 Tile Priyanka Samadhan,
Pawar Shital Shivaji,
Bodake Shobha Vishnu,
Sharmila M,
Automatic Solar Grass Cutter 201721030370
INDIA
Filed
57 Borse Kalpesh Shankarrao,
Salunkhe Nikhil Sambhaji,
Adke Nilesh Ramda,
R. K. Jha,
Induction Motor Fault Detection, Performance Monitoring, Data Logging and Protection 201721029088
INDIA
Filed
58 Chandwadkar Chaitanya Anil,
Jadhav Nutankumar Vilas,
Dr. Deepak P. Kadam,
GSM Based Fault Alert System 201721029089
INDIA
Filed
59 Kajale Manish Shivlal,
Patil Dinesh Mangal,
Khairnar Siddhesh Arun,
Dixit Jayesh Kailaskumar,
Hemant R. Kulkarni,
Industrial and Home Safety Management Using GSM 201721029090
INDIA
Filed
60 Waswani Ravi Amar,
Deore Mangesh,
Pawar Aakanksha Vijay,
Patel Rajankumar Vijay,
Dr. Deepak P. Kadam,
Train Crowd Management System 201721029091
INDIA
Filed
61 Barhate Antara Rajendra,
Patil Mayur,
Patil Rushikesh Shriram,
Phalak Kundan,
Dr. Deepak P. Kadam,
Windmill Monitoring, Maintenance and Controlling by Using Iot 201721029092
INDIA
Filed
62 Gajeshwar Swati Kanchan,
Lunavadwala Mustafa Juzer,
Ansari Sameer Ahmad Shakil Ahmad,
Shelar Jyoti Samadhan,
Ultra Fast Acting Electronic Circuit Braker 201721029528
INDIA
Filed

Code of Ethics to check malpractices and plagiarism in Research


Sandip Institute of Engineering and Management believe in academic freedom as the foremost principle and are core value to be safeguarded and sustained in our research, at all levels. The Institute is committed to promote high standards of integrity and responsibility and endorse a culture of honesty and transparency in all its academic research activities. The Institute is dedicated to guarantee open environment to conduct research, to teach, to speak and to publish, subject to the norms and standards of scholarly inquiry. The research can be carried out without interference or penalty, wherever the search for truth, knowledge, scholarship and/or understanding may lead.

Presently institute running UG courses. To check plagiarism we have stand alone plagiarism software available for students and faculty members of Sandip Foundation.

Researcher’s Responsibilities


Towards Colleagues:

  • When referring to the work of others, do not deliberately pretend their work.
  • Never present other researcher’s work as their own work.
  • Always acknowledge other’s contribution to their research and publication.
  • Clearly identify material which comes from other author’s publications or from personal communications.
  • In a collaborative team research, clearly outline roles and responsibilities; publications; co- authorship in publication, etc.

Towards Public:


Wherever public money is utilised in research, a responsibility to provide the account of how and why funds have been spent and what has been achieved.

Towards Sponsors:


Acknowledging the sponsoring agencies/bodies and also careful selection of the same while keeping in mind, that there is no compromise of ethics.