Dube, “Telescopic Conveyor System: A Review on Design, Development and Optimization,” Journal of Engineering Research and Reports, vol. 27, no. 5, pp. 14–20, 2025, doi: JERR.134692, ISSN: 2582-2926. [Scopus]
Chede, “Study of sub-zero treated and coated gauge and tool materials,” AIP Conference Proceedings, vol. 3178, pp. 130013-1–130013-7, 2025, doi: 10.1063/5.0229550. [Scopus]
P. Kulkarni, “An investigation on bearing strength behavior of pinned joints in graphene-embedded carbon/epoxy composites,” Journal of Physics: Conference Series, vol. 3045, no. 012006, 2025, doi: 10.1088/1742-6596/3045/1/012006. [Scopus]
P. Kulkarni, “Comparative analysis for the flow in a S-shaped diffuser using standard k-ɛ, realizable k-ɛ, and renormalized k-ɛ for different composite materials,” Journal of Physics: Conference Series, vol. 3045, no. 012013, 2025, doi: 10.1088/1742-6596/3045/1/012013. [WoS]
B. Ambekar, “A Review of Titanium-Alloy (Ti-6Al-4v) Machining Using Carbide Insert with PVD and CVD Coating,” AIP Conference Proceedings, vol. 3178, pp. 070014-1–070014-8, 2025, doi: 10.1063/5.0229338. [Scopus]
B. Ambekar, “Empirical Research on the Effects of Green Supply Chain Management (GSCM) Strategies on Industry Performance,” Nanotechnology Perceptions, ISSN: 1660-6795, 2025. [WoS]
M. Mahajan, “Experimental Study on Impact of Inlet Duct Elevation on the Indoor Thermal Environment,” in Advances in Clean Energy Technologies, Springer, 2025, doi: 10.1007/978-981-97-6548-5_1. [Scopus]
P. Joshi, “Tailoring FDM Process Parameters for Improved Mechanical Properties in Carbon Fiber-Infused ABS and PLA Composites,” Journal of Mines, Metals and Fuels, vol. 73, no. 1, pp. 103–115, 2025, doi: 10.18311/jmmf/2025/47239. [Scopus]
Dube, “Empirical Research on the Effects of Green Supply Chain Management (GSCM) Strategies on Industry Performance,” Nanotechnology Perceptions, vol. 20, no. S6, pp. 511–534, 2024, ISSN: 1660-6795. [WoS]
S. Dube, “Investigation of Heat Flux Variability in End Milling,” Nanotechnology Perceptions, vol. 20, no. S6, pp. 535–544, 2024, ISSN: 1660-6795. [WoS]
S. Dube, “Simulation and Analysis of a Power-Ejector Hybrid Cooling System: Thermodynamic Perspectives,” AIP Conference Proceedings, vol. 3178, 130007, 2024, doi: 10.1063/5.0229516. [Scopus]
S. Dube, “Model Analysis of Worm Gear Pair System Using Finite Element Analysis,” International Journal of Applied Mechanics and Engineering, vol. 29, no. 2, pp. 1–15, 2024, doi: 10.59441/ijame/186684. [Scopus]
N. Shelke, “Injector Deposition and Behavior Change of Diesel Engine Fueled with Calophyllum Oil Biodiesel Blend under 150 Hrs Endurance Test,” SAE Technical Paper, 2024, ISSN: 0148-7191, e-ISSN: 2688-3627, doi: 2023-01-0947. [Scopus]
Chede, “Study of sub-zero treated and coated Gauge and Tool Materials,” AIP Conference Proceedings, vol. 3178, 130013, 2024, doi: 10.1063/5.0229550. [Scopus]
P. Kulkarni, “Experimental Investigation of Machining Parameters of Inconel 718 for Turning Operation Using AHP and Topsis Methodology,” Journal, 2024.
B. Ambekar, “Future of Robotic Laser Cutting in the Industry 4.0 Era,” European Chemical Bulletin, vol. 12, S3, pp. 1017–1027, 2023, doi: 10.31838/ecb/2023.12.s3.115. [Scopus]
B. Ambekar, “Empirical Research on the Effects of Green Supply Chain Management (GSCM) Strategies on Industry Performance,” Nanotechnology Perceptions, vol. 20, no. S6, pp. 511–534, 2024, ISSN: 1660-6795. [WoS]
M. Mahajan, “An Experimental Study for Air Temperature Distribution in a Conditioned Room using Various Vertical Locations of Conditioned Air Ducts,” Current World Environment, vol. 19, no. 1, pp. 482–490, 2024, doi: 10.12944/CWE.19.1.39. [UGC]
M. Mahajan, “Design and Development of 3D Printed Robotic Arm for Painting Application,” JOIREM, vol. 20, no. 4, Apr. 2024. [UGC]
M. Mahajan, “Design and Development of 3D Printed Robotic Arm for Painting Application,” IJRAR, vol. 11, no. 2, Apr. 2024, e-ISSN: 2348-1269, p-ISSN: 2349-5138. [UGC]
K. Toke, “Vibration analysis and control of cracked beam using finite element method by using ANSYS,” World Journal of Engineering, vol. 20, no. 5, pp. 938–955, 2024. [Scopus]
K. Toke, “Linkages between Critical Success Factors and Factors of Workforce Performance in Remanufacturing Industry,” in Designing Workforce Management Systems for Industry 4.0, CRC Press, pp. 311–330, 2024. [Scopus]
K. Toke, “A review on the identification of total productive maintenance critical success factors for effective implementation in the manufacturing sector,” Journal of Quality in Maintenance Engineering, vol. 29, no. 1, pp. 114–135, 2024. [Scopus]
L. Bhirud, “‘The River Click Reinforcement Works’ Work Safety System,” European Chemical Bulletin, vol. 12, S3, 2023. [Scopus]
L. Bhirud, “Travelling of Drum by trolley with auto-lock system based on the conversion of gravitational energy into kinetic energy,” Indian Patent 432,250, 2023.
L. Bhirud, “Modeling and multi-objective optimization of cutting parameters using response surface method for milling of medium carbon steel (EN8),” International Journal on Interactive Design and Manufacturing (IJIDeM), 2024. []
S. Sali, “Computational Fluid Dynamics in Wind Energy: Modeling and Optimization for Turbine Design,” Panamerican Mathematical Journal, vol. 34, no. 2, 2024, ISSN: 1064-9735. [Scopus]
S. Sali, “Impact of Reinforcement Materials and Processing Condition Optimization in Microstructural Engineering of Polymer Composites,” Journal of Polymer & Composites, vol. 12, SI 4, 2024, ISSN: 2321-2810. [Scopus]
B. Patil, “Harnessing Natural Materials for Enhanced Properties and Environmental Remediation in Biosorption of Polymer Composites,” Journal of Polymer & Composites, vol. 12, SI 4, 2024, ISSN: 2321-2810. [Scopus]
D. Suryawanshi, “Advanced Design and Prototyping with Fabrication, Architecture, And Material Design Techniques for 3D Printing Hybrid Polymer Composites,” Journal of Polymer & Composites, vol. 12, SI 4, 2024, ISSN: 2321-2810. [Scopus]
Dube, “Multi-objective optimization of cutting parameters and helix angle for temperature rise and surface roughness using response surface methodology and desirability approach for Al 7075,” Int. J. Interactive Design and Manufacturing (IJIDeM), 2023, doi: 10.1007/s12008-023-01285-w.
S. Dube, “Modeling and multi-objective optimization of cutting parameters using response surface method for milling of medium carbon steel (EN8),” Int. J. Interactive Design and Manufacturing (IJIDeM), 2023, doi: 10.1007/s12008-023-01267-y.
N. Shelke, “Impact analysis of emulsified Calophyllum oil biodiesel B100-WIC and B50-WIC on performance and emission characteristic of a diesel engine under variation in Compression Ratio,” Int. J. Ambient Energy, 2023, Print ISSN: 0143-0750, Online ISSN: 2162-8246, doi: 10.1080/01430750.2020.1852110. [Scopus]
J. Chede, “Performance analysis of cryoprocessed conventional HSS M2 drill and P/M HSS M3 TiN coated tap and its effect on the substructure,” Materials Today: Proceedings, vol. 65, pp. 396–400, 2022, doi: 10.1016/j.matpr.2022.07.021. [SCI]
B. Ambekar, “Design and fabrication of grain transfer system by vacuum,” Int. Res. J. of Modernization in Engineering Technology and Science, vol. 5, no. 5, May 2023, e-ISSN: 2582-5208.
B. Ambekar, “Future of Robotic Laser Cutting in the Industry 4.0 Era,” Eur. Chem. Bull., vol. 12, S3, pp. 1017–1027, 2023, doi: 10.31838/ecb/2023.12.s3.115. [Scopus]
M. Mahajan, “Design and development of pedal powered water purification system,” Int. Res. J. of Modernization in Engineering Technology and Science, vol. 5, no. 5, May 2023, e-ISSN: 2582-5208. [39] S. M. Mahajan, “Energy generation by pedal power,” Int. J. of Research and Analytical Reviews (IJRAR), 2023, e-ISSN: 2348-1269, p-ISSN: 2349-5138. [UGC]
L. Bhirud , K. P. Joshi, “Modelling of energy and related parameters during milling: Review and discussions,” Materials Today: Proceedings, 2022, doi: 10.1016/j.matpr.2022.05.379. [SCI]
K. Toke, “Strategic planning to investigate the decision index of organization for effective total quality management implementation–in context of Indian small and medium enterprises,” J. of Engineering, Design and Technology, vol. 20, no. 3, pp. 749–776, 2023. [Scopus]
L. Bhirud, “Design and development of a machine to prepare and resize the sugarcane for sowing,” Indian Patent 358,590, 2023.
L. Bhirud, “Modeling and multi-objective optimization of cutting parameters using response surface method for milling medium carbon steel (EN8),” Int. J. Interactive Design and Manufacturing (IJIDeM), 2023, doi: 10.1007/s12008-023-01267-y. [Scopus]
K. Toke, “Assessment of green supply chain management practices, performance, pressure and barriers amongst Indian manufacturer to achieve sustainable development,” Int. J. Productivity and Performance Management, Emerald Publishing, 2022. [Scopus]
L. Bhirud, “Design and Analysis of Double End Drive Machine for Automation of Circular Welding Process,” J. of Physics: Conf. Series, vol. 1455, no. 1, 012027, 2021. [Scopus]
J. Chede, “Material selection for design of powered hand truck using TOPSIS,” Int. J. Industrial and Systems Engineering, vol. 39, no. 2, 2021. [Scopus]
B. Ambekar, “Sustainable Precision: Unveiling the Potential of PVD and CVD Coated Carbide Inserts in Machining α-β Titanium Alloy (Ti–6Al–4V),” European Chemical Bulletin, vol.
S. Dube, “Design and Development of Solar Panel Cooling System,” in Proc. Int. Conf. Emerging Trends in Eng. and Technology, Virtual Conference, Nashik, India, Jul. 20–21, 2022, ISBN: 978-93-92105-02-9.
S. Dube, “Performance Evaluation of Mini-Air Cooler Operating on Solar Energy,” in Proc. Int. Conf. Emerging Trends in Eng. and Technology, Virtual Conference, Nashik, India, Jul. 20–21, 2022, ISBN: 978-93-92105-02-9.
S. Dube, “Design and Development of Portable Bricks Machine Using Natural Leaves,” in Proc. Int. Conf. Emerging Trends in Eng. and Technology, Virtual Conference, Nashik, India, Jul. 20–21, 2022, ISBN: 978-93-92105-02-9.
S. Dube, “Effect of Ageing on Performance of Ice Plant Test Rig,” in Proc. Int. Conf. Emerging Trends in Eng. and Technology, Virtual Conference, Nashik, India, Jul. 20–21, 2022, ISBN: 978-93-92105-02-9.
S. Dube, “Thermodynamic Simulations of Combined Power and Ejector Cooling System,” in Proc. Int. Conf. Emerging Trends in Eng. and Technology, Virtual Conference, Nashik, India, Jul. 20–21, 2022, ISBN: 978-93-92105-02-9.
S. Dube, “Effect of Working Fluid & Pipe Material on Performance of Heat Pipe,” in Proc. Int. Conf. Emerging Trends in Eng. and Technology, Virtual Conference, Nashik, India, Jul. 20–21, 2022, ISBN: 978-93-92105-02-9.
S. Dube, “Vertical Axis Maglev Wind Turbine: A Review,” in Proc. Int. Conf. Emerging Trends in Eng. and Technology, Virtual Conference, Nashik, India, Jul. 20–21, 2022, ISBN: 978-93-92105-02-9.
S. Dube, “Development of Direct Contact Heat Exchanger for Removal of Tar in FBG,” in Proc. Int. Conf. Emerging Trends in Eng. and Technology, Virtual Conference, Nashik, India, Jul. 20–21, 2022, ISBN: 978-93-92105-02-9.
S. Dube, “Development of Virus-Bacteria Disinfection Box Using UV-C (Ultraviolet Rays),” in Proc. Int. Conf. Emerging Trends in Eng. and Technology, Virtual Conference, Nashik, India, Jul. 20–21, 2022, ISBN: 978-93-92105-02-9.
S. Dube, “Experimental Investigation of Process Parameter in Turning using Design of Experiment,” in Proc. Int. Conf. Emerging Trends in Eng. and Technology, Virtual Conference, Nashik, India, Jul. 20–21, 2022, ISBN: 978-93-92105-02-9.
S. Dube, “Design and Testing of Novel Solar Dryer,” in Proc. Int. Conf. Emerging Trends in Eng. and Technology, Virtual Conference, Nashik, India, Jul. 20–21, 2022, ISBN: 978-93-92105-02-9.
S. Dube, “Performance Improvement in Gas Water Heating System,” in Proc. Int. Conf. Emerging Trends in Eng. and Technology, Virtual Conference, Nashik, India, Jul. 20–21, 2022, ISBN: 978-93-92105-02-9.
S. Dube, “Wireless Smart Electrified Road for EV with Dynamic and Static Charging by Solar Energy,” in Proc. Int. Conf. Emerging Trends in Eng. and Technology, Virtual Conference, Nashik, India, Jul. 20–21, 2022, ISBN: 978-93-92105-02-9.
S. Dube, “IoT Based Smart Production Line,” in Proc. Int. Conf. Emerging Trends in Eng. and Technology, Virtual Conference, Nashik, India, Jul. 20–21, 2022, ISBN: 978-93-92105-02-9.
S. Dube, “Self-Adjusting Ground Clearance System,” in Proc. Int. Conf. Emerging Trends in Eng. and Technology, Virtual Conference, Nashik, India, Jul. 20–21, 2022, ISBN: 978-93-92105-02-9.
S. Dube, “Green Supply Chain Practices and Initiatives in the Indian SMEs,” in Proc. Int. Conf. Emerging Trends in Eng. and Technology, Virtual Conference, Nashik, India, Jul. 20–21, 2022, ISBN: 978-93-92105-02-9.
J. Chede, “Design and Implementation of Material Handling Trolley in Heat Treatment Section,” in Proc. Int. Conf. Emerging Trends in Eng. and Technology, Virtual Conference, Nashik, India, Jul. 20–21, 2022, ISBN: 978-93-92105-02-9.
K. Toke, “Review of Various Techniques of Optimization of Machining Parameter of Inconel-718 for Green Manufacturing,” in Proc. Int. Conf. Emerging Trends in Eng. and Technology, Virtual Conference, Nashik, India, Jul. 20–21, 2022, ISBN: 978-93-92105-02-9.
L. Bhirud, “Optimization of Total Cycle Time of Tempering Process,” in Proc. Int. Conf. Emerging Trends in Eng. and Technology, Virtual Conference, Nashik, India, Jul. 20–21, 2022, ISBN: 978-93-92105-02-9.
L. Bhirud, “Review of Eco-Friendly Cleaning Machine,” in Proc. Int. Conf. Emerging Trends in Eng. and Technology, Virtual Conference, Nashik, India, Jul. 20–21, 2022, ISBN: 978-93-92105-02-9.
D. Patil, “Development of Direct Contact Heat Exchanger for Removal of Tar in FBG,” in Proc. Int. Conf. Emerging Trends in Eng. and Technology, Virtual Conference, Nashik, India, Jul. 20–21, 2022, ISBN: 978-93-92105-02-9.
D. Patil, “To Develop a System for Maintaining Oxygen Level Inside the Room,” in Proc. Int. Conf. Emerging Trends in Eng. and Technology, Virtual Conference, Nashik, India, Jul. 20–21, 2022, ISBN: 978-93-92105-02-9.
D. Patil, “Design and Development of Mobile Operated Smart Solar Gardening Robot,” in Proc. Int. Conf. Emerging Trends in Eng. and Technology, Virtual Conference, Nashik, India, Jul. 20–21, 2022, ISBN: 978-93-92105-02-9.
D. Patil, “Design and Fabrication of Coin Operated Portable Mask Vending Machine,” in Proc. Int. Conf. Emerging Trends in Eng. and Technology, Virtual Conference, Nashik, India, Jul. 20–21, 2022, ISBN: 978-93-92105-02-9.
D. Patil, “Design and Development of Fatigue Testing Machine,” in Proc. Int. Conf. Emerging Trends in Eng. and Technology, Virtual Conference, Nashik, India, Jul. 20–21, 2022, ISBN: 978-93-92105-02-9.
D. Patil, “Design and Development of Earth Analyzer,” in Proc. Int. Conf. Emerging Trends in Eng. and Technology, Virtual Conference, Nashik, India, Jul. 20–21, 2022, ISBN: 978-93-92105-02-9.
D. Patil, “Design and Fabrication of Silage Packaging Machine for Agricultural Application,” in Proc. Int. Conf. Emerging Trends in Eng. and Technology, Virtual Conference, Nashik, India, Jul. 20–21, 2022, ISBN: 978-93-92105-02-9.
D. Patil, “Design and Development of Fatigue Testing Machine,” in Proc. Int. Conf. Emerging Trends in Eng. and Technology, Virtual Conference, Nashik, India, Jul. 20–21, 2022, ISBN: 978-93-92105-02-9.
D. Patil, “Hybrid Electricity Generation on Highway,” in Proc. Int. Conf. Emerging Trends in Eng. and Technology, Virtual Conference, Nashik, India, Jul. 20–21, 2022, ISBN: 978-93-92105-02-9.
D. Patil, “Design and Fabrication of Coin Operated Portable Mask Vending Machine,” in Proc. Int. Conf. Emerging Trends in Eng. and Technology, Virtual Conference, Nashik, India, Jul. 20–21, 2022, ISBN: 978-93-92105-02-9.
D. Patil, “Automatic Pipe Cutting Machine,” in Proc. Int. Conf. Emerging Trends in Eng. and Technology, Virtual Conference, Nashik, India, Jul. 20–21, 2022, ISBN: 978-93-92105-02-9.
E. Bodke, “Design and Development of Solar Panel Cooling System,” in Proc. Int. Conf. Emerging Trends in Eng. and Technology, Virtual Conference, Nashik, India, Jul. 20–21, 2022, ISBN: 978-93-92105-02-9.
E. Bodke, “Automatic Pipe Cutting Machine,” in Proc. Int. Conf. Emerging Trends in Eng. and Technology, Virtual Conference, Nashik, India, Jul. 20–21, 2022, ISBN: 978-93-92105-02-9.
P. Joshi, “Comparative Analysis of 3D Printed Tensile Component,” in Proc. Int. Conf. Emerging Trends in Eng. and Technology, Virtual Conference, Nashik, India, Jul. 20–21, 2022, ISBN: 978-93-92105-02-9.
B. Ambekar, “Design and Modification of Banana Fiber Extraction Machine,” in Proc. Int. Conf. Emerging Trends in Eng. and Technology, Virtual Conference, Nashik, India, Jul. 20–21, 2022, ISBN: 978-93-92105-02-9.
P. Kulkarni, “Automatic Pipe Cutting Machine,” in Proc. Int. Conf. Emerging Trends in Eng. and Technology, Virtual Conference, Nashik, India, Jul. 20–21, 2022, ISBN: 978-93-92105-02-9.
M. Mahajan, “Comparative Analysis of 3D Printed Tensile Component,” in Proc. Int. Conf. Emerging Trends in Eng. and Technology, Virtual Conference, Nashik, India, Jul. 20–21, 2022, ISBN: 978-93-92105-02-9.
U. Shinde, “Design and Modification of Banana Fiber Extraction Machine,” in Proc. Int. Conf. Emerging Trends in Eng. and Technology, Virtual Conference, Nashik, India, Jul. 20–21, 2022, ISBN: 978-93-92105-02-9.
Dube, “Design and Performance Analysis of Solar Water Heater and Dryer System,” Int. J. Disaster Recovery and Business Continuity, vol. 11, no. 3, pp. 2217–2222, 2020, ISSN: 2005-4289.
S. Dube, “Role of Cascade Refrigeration System in Adoption of Lower Temperature,” Int. J. Disaster Recovery and Business Continuity, vol. 11, no. 3, pp. 2104–2109, 2020, ISSN: 2005-4289.
S. Dube, “Role of Robotics in Welding,” Int. J. Disaster Recovery and Business Continuity, 2020.
S. Dube, “Multi-Climate Air Cooler,” Int. J. Disaster Recovery and Business Continuity, 2020.
S. Dube, “Design and Analysis of Double End Drive Machine for Automation of Circular Welding Process,” J. Phys.: Conf. Ser., vol. 1455, no. 1, 012027, 2021. [SCI/Scopus]
S. Dube, “Optimization of Weight for Spring of Two-Wheeler Suspension Issuing Composite Material,” TEST Eng. and Management, vol. 83, pp. 25861–25870, 2020. [SCI/Scopus]
S. Dube, “Assessment of Green Supply Chain Management practices, performances, pressures and barriers amongst Indian manufacturer,” Int. J. Productivity and Performance Management, Emerald, 2020. [Scopus]
S. Dube, “Optimization of machining parameter of Inconel 718 in turning operation for Green Productivity – A Review,” J. Solid State Technology, 2020. [Scopus]
S. Dube, “Strategic planning to investigate the decision index of organization for effective total quality management implementation – in context of Indian small and medium enterprises,” J. Eng. Design and Technology, Emerald, 2020. [Scopus]
S. Dube, “Design and Construction of Solar and Wind Hybrid Power Generation System,” in Proc. Int. Conf. Emerging Trends in Eng. and Technology, Nashik, India, May 28–29, 2020, IFERP.
S. Dube, “Design and Development of Fire Fighting Robot and Android Controller,” in Proc. Int. Conf. Emerging Trends in Eng. and Technology, Nashik, India, May 28–29, 2020, IFERP.
S. Dube, “Design and Development of Material Handling Robot,” in Proc. Int. Conf. Emerging Trends in Eng. and Technology, Nashik, India, May 28–29, 2020, IFERP.
S. Dube, “Eco-Friendly Waste Management System for Sanitary Pad,” Int. J. Disaster Recovery and Business Continuity, 2020.
S. Dube, “Condition Monitoring of Machine Tool for Manufacturing Fasteners,” Int. J. Disaster Recovery and Business Continuity, 2020.
S. Dube, “Modification of Roller Specification in Spinning Machine,” Int. J. Disaster Recovery and Business Continuity, 2020.
S. Dube, “Design and Manufacturing of Pneumatic Conveyor Using Double Acting Cylinders for Machine Shop,” Int. J. Disaster Recovery and Business Continuity, 2020.
S. Dube, “Optimization of machining parameter of Inconel 718 in turning operation for Green Productivity – A Review,” J. Solid State Technology, 2020. [Scopus]
S. Dube, “Design and Fabrication of Pneumatic Conveyor Using Double Acting Cylinders,” in Proc. Emerging Trends in Eng. and Technology, 2020.
S. Dube, “Design and Manufacturing of Logistic Robotic Arm,” in Proc. Emerging Trends in Eng. and Technology, 2020.
S. Dube, “Design and Fabrication of 360° Rotating Conveyor Belt with Up-Down Mechanism,” Int. J. Disaster Recovery and Business Continuity, 2020.
S. Dube, “Design and Fabrication of Automatic Bead Placing Device for Truck Tire Building Machine,” Int. J. Disaster Recovery and Business Continuity, 2020.
J. Chede, “Using Solar Energy,” Int. J. Disaster Recovery and Business Continuity, vol. 11, no. 3, pp. 2217–2222, 2020.
J. Chede, “Frictionless Energy Generation Using Flywheel,” Int. J. Disaster Recovery and Business Continuity, vol. 11, no. 3, pp. 2104–2109, 2020.
J. Chede, “Design and Manufacturing of Equipment for Making Sieve Slurry,” Int. J. Disaster Recovery and Business Continuity, vol. 11, no. 3, pp. 2098–2103, 2020.
J. Chede, “Quality Improvement of 3D Objects by Removing Microscopic Defects,” in Proc. Int. Conf. Research Challenges to Multidisciplinary Innovation, GGSCOE, Nashik, Mar. 31, 2021.
J. Chede, “Role of Cascade Refrigeration System in Adoption of Lower Temperature,” Int. J. Disaster Recovery and Business Continuity, 2020.
P. Kulkarni, “Design and Manufacturing of Remotely Operated Vehicle,” Int. J. of Scientific Research in Engineering and Management, 2020.
P. Kulkarni, “Design and Simulation of Drawbead Profile in Sheet Metal Forming of Components,” Int. J. of Scientific Research in Engineering and Management, 2020.
M. Mahajan, “A Review on Air Distribution and Indoor Thermal Environment,” in Proc. Int. Conf. Research Challenges to Multidisciplinary Innovation, GGSCOE, Nashik, Mar. 31, 2021.
M. Mahajan, “Quality Improvement of 3D Objects by Removing Microscopic Defects,” in Proc. Int. Conf. Research Challenges to Multidisciplinary Innovation, GGSCOE, Nashik, Mar. 31, 2021.
K. Toke, “A Review on Optimization of Machining Parameters for Surface Roughness in Turning Operation of Titanium Alloy,” Int. J. Disaster Recovery and Business Continuity, 2020.
K. Toke, “A Review on Optimization of Machining Parameters of Titanium Alloy (Ti-6Al-4V) for Tool Life in Turning Operation,” Int. J. Disaster Recovery and Business Continuity, 2020.
K. Toke, “A Review on Optimization of Machining Parameters for Surface Roughness in Turning Operation of Titanium Alloy,” Int. J. Disaster Recovery and Business Continuity, 2020.
D. Patil, “Design and Manufacturing of Balanced Stretcher,” in Proc. Emerging Trends in Eng. and Technology, 2020.
D. Patil, “Quality Improvement of 3D Objects by Removing Microscopic Defects,” in Proc. Int. Conf. Research Challenges to Multidisciplinary Innovation, GGSCOE, Nashik, Mar. 31, 2021.
D. Patil, “Design and Manufacturing of Hedge Trimmer,” in Proc. Emerging Trends in Eng. and Technology, 2020.
D. Patil, “Design and Fabrication of Major Losses Test Rig,” Int. J. Disaster Recovery and Business Continuity, 2020.
D. Patil, “Optimization of Parameters of CNC Plasma Cutting Machine for M.S. Cutting,” Int. J. Disaster Recovery and Business Continuity, 2020.
D. Patil, “Exhaust Operated Air Braking System,” in Proc. Emerging Trends in Eng. and Technology, 2020.
D. Patil, “Quality Improvement of 3D Objects by Removing Microscopic Defects,” in Proc. Int. Conf. Research Challenges to Multidisciplinary Innovation, GGSCOE, Nashik, Mar. 31, 2021.
D. Patil, “Design and Fabrication of Three-Way Dumping/Tipping Trolley,” in Proc. Emerging Trends in Eng. and Technology, 2020.
